Jump to content
SAU Community

Recommended Posts

Hey guys,

I have a r32 with an rb20det and an rb25 turbo. The turbo blew up and i replaced it with another rb25 turbo. Ever since replacing it the boost pressure wont limit itself. Anything over 3500-4000rpm causes the boost pressure to spike. It got to around 15 psi before i backed off to avoid damaging the turbo or other components. I have a turbosmart boost tee installed which was set to 12psi before swapping turbos and worked perfectly. After this issue i wound it right back to see if that was the issue but im still having the same problem.

Any ideas on what the problem would be?

EDIT: Sorry I just realised I posted in the wrong spot. Not sure how to delete.

Edited by Anthony9five

Well seeing as the waste gate Controls boost it would be wise to check you plumbed it up correctly.

What else could have changed?

Ill triple check that in the morning but im pretty sure its plumbed up correctly.

Thats what has me confused. Ive checked all the basic stuff and no luck. Im just hoping for ideas on things I may have missed.

What happens when the boost controller is removed wastegate is plumbed directly?

I haven't tried that yet as I don't have a length of pipe long enough. I'm not gonna rule that out, but the boost controller was working perfectly before the turbo swap. If i cant fix it ill buy some pipe and try that though

Are you sure your hoses are going into the correct ports on the solenoid?

Any pics?

Ill grab some pics in the morning.

The point is the wastegate may not even be opening sufficiently due to a physical obstruction or a problem with the actuator.

Could be a dodgy Watergate or possibly the flap is fouling on the dump pipe

How would i diagnose this? And then how would I fix it if it is the issue?

To diagnose the wastegate flap fouling you need to disconnect the wastegate and swing the flap to see if it opens.

I did this and the flap moves easily. Not fouling on anything.

Is the boost T the right way? They are a one way valve inside.

I can't tell if the boost source for the turbo actuator is coming from the BOV or not, it should come from the piping.

Yeah the boost tee is the right way. There is an arrow on it that has to be pointed towards the wastegate, which it is.

The boost source is coming from the piping not the BOV.

As has been said, try running the wastegate straight from the piping.

There is always the chance though that the wastegate itself is damaged. If you have a pump you could attach it to the line to the wastegate and see if it opens when pressure is applied (or if the diaphragm in the wastegate is damaged)

Kinugawa makes an actuator where you can replace the springs to suit the boost level you want to run.

I am using one on a hypergear turbo, although I had to make a new bracket in order to mount it to the turbo. Its supposed to fit a stock turbo though.

http://www.ebay.com.au/itm/Kinugawa-Adjustable-Turbo-Wastegate-Actuator-Nissan-Skyline-RB25DET-R33-/291501973534?pt=LH_DefaultDomain_15&hash=item43dedf201e

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...