Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...

Update

We slapped some ao50 semi slicks on some light weight gtr rims

Went to smsp south and had a crack

Ended up with a 1.05.03

To put that into perspective the week I bought my gtr stock on street rubber it did the same times

Epic corner speed 

Some vids below
Fast lap
https://youtu.be/NF2L5zHtKvE
Chasing a gtr
https://youtu.be/IaTFbU50MV4
Bloopers
https://youtu.be/ZbC4Y2fKyXs

The car is epic fun

 

next update shoul involve Tripple the hp

  • Like 6
  • 1 month later...
  • 1 year later...

Bump

So we went and did the 24 hr race and parked it

so last week we hatched a plan over 20-50 beers

so she will be back with a little more grunt plan is 3 times power and she will be at sau track day to pass some gtrs

Upgrade include

rb25det, 6 boob, 3037, external gate, injectors, twin plate, 1000hp tail shaft, 25 box, blah blah blah

If all goes well will enter nsw time attach for a laugh

 

58319935-D1F1-4B86-8DB6-895B7119DFEA.thumb.jpeg.da6905b658d62742887460cc97abafa5.jpeg

Will be at the jez for a tune next week

 

 

 

 

9D300984-1B53-4A45-876A-E49BADBC9D5F.jpeg

  • Like 1
  • Thanks 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...