Jump to content
SAU Community

Recommended Posts

I'd be concerned, but having said that it is a skyline...... This is what we have to deal with. Power that is making is fine, don't worry. Compression, yes.

So can you please tell me what race pace said about Power FC V's Haltech as I was looking to go a Haltech, as the car I purchased had a PFC, and the AFMs are maxed and I have E85 local.

Thanks!

The power is an issue for me because I was hoping for more like 450hp.

I'm in two minds about compression given that it's a higher kilometres engine anyway and a rebuild would have always been in my future.

With the spares that come with the car I could go a long way to covering the cost of a rebuild and then I'd have a fresh motor.

The other part of me thinks I could just as easily pass on this and wait until something better comes along. There's still things like the box, diffs, etc to consider

Chris said the Haltech had more features but the PFC ran car better, especially on standard ignition setups and was happier without a crank trigger setup than the Haltech.

Edited by ActionDan

Just received this video.

I have no idea what a "cold" engine should show on a thermal gun but I'd think it would be higher than 23 degrees.

I did mentioned to him that cranking it that many times can give a false positive as the cylinder has a chance to keep building pressure.

He's going to have another go when his brother drops by so he can video the comp gauge building pressure on each stroke for me.

https://www.youtube.com/watch?v=Sf5_UfXRlkc

It's one thing to buy a car to drive and build up at your own pace and another to buy one expecting to do a rebuild.

If you budget extends as much then it's worth considering or even worth renegotiating the price slightly if you decide to stay with this one, covering yourself when you rebuild.

GL bud.

The question is whether it needs a rebuild or not. The guy at Godzilla seemed like a bit of an ass to be honest. To then see these comp test results be different doesn't fill me with confidence he did a good job testing it.

I will have another mechanic look it over.

I would have to think that between the 2x Rims, the HKS Catback Exhaust and the RB30 short block there'd have to be 6-7k there, that goes a long way "IF" the car needs a fresh bottom end.

I might stretch and insist I want the PFC also as he was contemplating keeping that.

Well I just got some bad news...

Jap history came with this auction report and these comments. I'll await his summary but I don't think there's any mistaking the front end damage, especially if it implies an oil leak that was not minor.

I realise that the repairs may have been done well, but its still of concern.

"Unfortunately photos of the car at auction are no longer available since the auction took place so long ago now, just the auction sheet itself and related meta-data still exist.

You may have some questions in regard to the grading which is uncommon - a zero grade was awarded to indicate that the vehicle required mechanical repairs (although not noted in detail - the oil leak noted is presumed not to have been minor). Given the other noted repairs which are structural in nature, the vehicle would have received an R grading had it not been for the oil leak issue.

We'll be in touch again shortly with the registration certificate result and summary. "

post-23873-0-02172600-1442355497_thumb.jpg

Edited by ActionDan

No idea of the condition, but it does seem like a good base to build, local-ish is also a step in the right direction

http://www.gumtree.com.au/s-ad/lynbrook/cars-vans-utes/r34-gtr/1087776979

All the best with your search, this is one of my fav threads at the moment, only second to the R34 picture thread

Edited by squareznboxez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...