Jump to content
SAU Community

Recommended Posts

Hey guys, my rotors have had their better days and are due for a change, actually that worn that they can't be machined. I have a track day coming up and don't want to risk it with those brakes flying down a straight at 200. I've read mixed reviews on all rotors, just wanted to see what everyone thought. What rotors would be recommended for slight track use but mainly a daily. Note my budget isn't the greatest !

Car is a R33 gts-t

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/460013-rotors/
Share on other sites

Over the years I've only used 3 types of rotors in my Riceline, OEM, RDA Slotted and Dimpled and DBA T3 Slotted. In my opinion there was very little difference in performance between the three as far as on the track went. I found that the main difference came to how glazed the rotors where at the end of the day (OEM glazed badly, RDA was better and DBA was even better than RDA) and NVH (OEM had little to no NVH, DBA had a little and RDA had the most)

If I had to do it all over again and price wasn't a consideration, I'd probably go the DBAs for no other reason than I like the look of the slot pattern. In reality I'd probably just go an OEM or OEM style because I'm tighter these days!

Link to comment
https://www.sau.com.au/forums/topic/460013-rotors/#findComment-7610257
Share on other sites

I think that you should move down this list depending on budget and application:

1. Two piece floating rotor (PFC, Project Mu, etc)

2. Two piece rotor (DBA5000, etc)

3. One piece rotor with uni directional vanes (DBA4000, RDA, etc)

All will be suitable for light track work.

Link to comment
https://www.sau.com.au/forums/topic/460013-rotors/#findComment-7610267
Share on other sites

Yeah if you want to waste even more money buy project mu.

Waste? Have had project mu on my car for years. They cope really well to track work and don't crack like I have experienced other rotors doing. The 2 piece I have on the front of my GTR have stood up really, really well. Something I cant say for their equivalent in a DBA or an RDA. So, yeah, if waste is fixing it once, properly, then waste away. You don't need to spend big dollars on Pommie stuff.

Link to comment
https://www.sau.com.au/forums/topic/460013-rotors/#findComment-7610838
Share on other sites

How much are you paying for your DBA rotors? And how many times do you multiply that by for replacement and/or machining?

Not all PMu rotors are two piece they have a number of different one piece options.

Anyway there is an option there. How cheap or how hard he uses them is up to him.

Link to comment
https://www.sau.com.au/forums/topic/460013-rotors/#findComment-7610902
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...