Jump to content
SAU Community

Recommended Posts

^you will be more likely to rub the tyres due to increased diameter and speedo will also be out. I run 265/35/18 and they are just about right. If I was to go 275 or bigger I would be going with a 30 profile. Use a tyre size calculator on the webz and try to match the factory rolling diameter as close as possible with your new size.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620001
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620005
Share on other sites

What's the issue with increasing rolling diameter. I though what's important was to keep all 4 tyres the same size for the awd

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620014
Share on other sites

yep, you need to keep all 4 wheels the same rolling diameter, you also want to keep this rolling diameter the same as factory.

your answer has been given, if your at stock height then it will fit but will not be ideal, your gonna have an incorrect speedo

Apart from incorrect speedo the 40 profile will it rub under normal driving conditions?

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620032
Share on other sites

According to ADRs and other stupid rules your apparently not allowed to fit a rim greater than 1" width and 1" diameter over stock. Sigh. I guess that's why most of us keep a set of some sort of stock rims just in case. but hey who could be farked getting defected.

I believe we have 2" increase as the 33 ways more than 1400kg

FWIW guys, at least in SA, they do not actually still go by those old rules regarding a fixed number of inches increase in wheel width or wheel diameter. So long as the % change in rolling diameter is inside the limits you can do any diameter change you like. So that comes down to availability of suitable profile tyres. Same with the width. So long as track is not out of spec and wheels/tyres do not poke or have interference problems, you can have as many inches extra as you like.

Of course, practically this often works out to being not much difference to the old blanket rules anyway.

So while I know this to be the case in SA, it may or may not be in other states. But it was my understanding that most of the other states are being equally realistic about it these days. The old rules were written in simpler times.

Link to comment
https://www.sau.com.au/forums/topic/460372-will-this-rub/#findComment-7620160
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
    • thanks, will conduct myself accordingly. i unfortunately put about 150 miles on the car before reading this thread again, however no PS issues, and definitely no turbo issues. it spools normally and still feels fast to me, probably because my previous car was an N/A auto sedan...gonna go fix the PS vacuum line though lol. safe to say, got what i came to this thread for. thanks  
    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
×
×
  • Create New...