Jump to content
SAU Community

Recommended Posts

So sick of these skylines and there shitty coilpacks. Yesterday i did a full service, basically changed the spark plugs, oil and oil filter. But when i was test driving the car, you could hear it misfiring. The cylinder seems like its still running, its just not getting a 100% proper connection. Basically you can hear the exhaust pop during idle, and as your taking off it slightly misses and when you flat out give it, it chugs back every 1000rpm or so. I checked the coilpack loom connections and made sure they were all plugged in...so does it seems like its one coilpack thats basically failed? its a f**king rb25 neo n/a so to unplug coilpack 2,3 and 4 you need to take off the god damn plenum extension and a few lines on top of it!

Link to comment
https://www.sau.com.au/forums/topic/460562-another-coilpack-issue/
Share on other sites

Depends on the people that own the car before you to. My Skyline was imported by a family member who lives in Japan and it has genuine low mileage, and completely stock, the only issues I've had are headlight switch and the window switch. Not bad for a car 1/4 of a century old!

When you changed your plugs did you adjust the gap correctly and use the right plugs?

Did you check the coil packs for arcing and tape them up if you saw some?

Did you use dielectric grease around the boots before you put the coils in?

Is the coil pack loom OK?

Im just gonna change all the coilpacks and loom because they are all pretty worn out and damaged the coilpacks already have tape on them and some of the inlets on the plugs are broken. Do you think its still ok to drive the car for a few days? it wont damage the engine or anything like that?

no it wont hurt it too much if it's only missing

ok cool thanks. Like i said it misses every 2-3 seconds on idle and when you plant your foot down but doesnt miss when you are cruising it. Also, i really dont want to pay that much for yellow jackets, if i had a gtr then i would be more than happy to but its just a n/a so ill get stock coilpacks

Edited by IM-32-FK

Guys i need your help. I changed the coilpacks and loom and it still didnt fix the issue so it must be spark plug issue. But ive always used the same spark plugs - ngk bcpr7es -11 . I know its a bit over the top but it always ran good with them. Im left with no choice but to gap them to 0.8. So you think this will fix the issue? It took me like 4 hours and alot of sweat and blood to pull everything apart and put it back together so im pretty pissed off. I didn't even go work today to do it so i lost out on alot of money anyway. Please tell me this will fix the issue otherwise i got no idea what it would be. I also used 10-40 penrite fully synthetic pro racing esther.

If i gap them to 0.8 and it still doesnt fix the issue, then what else could it be? This shit is giving me anxiety i want my car running properly otherwise its always in the back of my mind

Thanks

Edited by IM-32-FK

Told you to gap them down

I wish i listened to you man... Ive already wasted 7 hours total so far on this shit. I feel so bad now i gotta buy the gapping tool tomorrow after work and see what happens. I hope it fixes the issue otherwise im gonna burn my car down

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...