Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking at upgrading the exhaust on my R34 GTT over the next few months. I was just wondering what my best options are for with:

- Quiet on idle

- Loud on high RPM

- Offers the highest performance

- Budget of $1,000

Anyone have recommendations and stores to buy from?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/460950-r34-gtt-exhaust-options/
Share on other sites

For highest performance you'll want a full turbo back including dump, front pipe and a high flow cat.

I'd offer a couple of other requirements to add to the list if I may:

  • Properly fitted and tucked in for maximum ground clearance, there's nothing worse than scraping your car or mid muffler on speed humps all the time
  • Not droney at standard road speeds 60, 80, 100, 110

The cheapest may not be the best. I have a full frankenexhaust mixed from random parts, it fits well and performs great but is droney and probably ended up being more costly this way too...

Hey guys,

Looking at upgrading the exhaust on my R34 GTT over the next few months. I was just wondering what my best options are for with:

- Quiet on idle

- Loud on high RPM

- Offers the highest performance

- Budget of $1,000

This doesn't really exist with the budget you have.

Unless you want to buy like, someone's second hand exhaust and then do a little modding/fabbing to make it fit and work with your setup as every setup is a bit different.

In other words, buy my old exhausts, thanks - Nothing off a shelf is going to satisfy the criteria you've listed

$1000 will only get you something second hand if you require turbo back and it will either be loud or restrictive.

I'd probably try to find something second hand that flows really well and stick a decent muffler in it.

I can probably compromise on a few areas for now. With just a basic exhaust surely $1,000 is sufficient? (Excluding installation)

It can be done, try Jesse Streeter or Import Monster and see if they can supply a Fujitsubo Legalis or similar. Understand these will have a restrictor inbuilt and will struggle to make top end power, but will sound great and be legal or close to legal dB.

Otherwise there are quite a few places that could do a custom stainless system for that coin.

Buy a cheap mig, a hooker aeroflow, a Berkelee straight through.. Some pipe and bends.

Make. It.

Then you also own a shit mig welder. But it's an exhaust. So shit welds are ok.

That's what you get when you pay an "expert " to make one.

You will either crash car or sell it before exhaust wears out......or falls off, depending how shit you weld.

Google. How to weld.

  • Like 2

This doesn't really exist with the budget you have.

Unless you want to buy like, someone's second hand exhaust and then do a little modding/fabbing to make it fit and work with your setup as every setup is a bit different.

In other words, buy my old exhausts, thanks - Nothing off a shelf is going to satisfy the criteria you've listed

If you want to get some ideas for a modded setup here's what I have:

  • JJR 3" bellmouth dump/front – customised (to ensure good fit with my Hypergear IWG, and for ground clearance)
  • Venom 3" high flow metal cat – flows much more than the XForce I had first
  • Custom 3" piping between cat and mid muffler
  • Small mid muffler – for good ground clearance
  • HKS Super Drager 3.5" to 5" rear section and muffler

It would have been cheaper to build a full custom system rather than mixing and matching parts over time but oh well. Also full second hand systems for the sedan are like hen's teeth.

And get raped hard. What a bloody stupid idea to promote...

A decent exhaust doesn't improve in power when you drop it.

LoL one out of a million effective methods.

My R34's pumping 380rwkws internally gated with exhaust dropped, make no where where near it with 3 inches exhaust back on. I'm sure you will come up with a quite alternative.

I have a full turbo back system to suit an R34 sedan that I may be willing to part with if anyone ever requires one.

Psssh, I have two of them! :P

LoL one out of a million effective methods.

My R34's pumping 380rwkws internally gated with exhaust dropped, make no where where near it with 3 inches exhaust back on. I'm sure you will come up with a quite alternative.

How does that system actually work? Because looking at it, I actually thought it was a better (i.e, far easier to hide) system than Scotty's "external gate on housing" setup.

Then again, why not just simply make the dump diameter that size?

Car is currently running a full 3 inches SS Havoc fabrications turbo back exhaust with two megnaflow mufflers keeping it quite.

The idea is getting back pressure out of the exhaust system. Valve is spring pensioned that is forced open by exhaust gas pressure when > 3psi. It is currently opening at WOT in 3rd and 4th.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...