Jump to content
SAU Community

R34 Rb25neo Turbo Upgrade Advice

BurnzGTT

By BurnzGTT,
in Engines & Forced Induction

 Share

Recommended Posts

BurnzGTT Enthusiast

BurnzGTT

Posted
Posted

As the title states, i am here seeking advice. Looking for 270-300rwkw internaly gated on standard manifolds with P98. Have ordered 810cc injectors, and all the usual stuff. The options i am looking at are the Hypergear OP6 high flow, The kando TD06 25g, and the TD06 20g (Direct Bolt Ons.) The 25g is at the top of my price range at $1050. The hypergear is $850. Anyone here had experience with these Turbos on the 25NEO?

TIA

Link to comment
https://www.sau.com.au/forums/topic/461153-r34-rb25neo-turbo-upgrade-advice/
Share on other sites
Gcjosh Community Regular

Gcjosh

Posted
Posted (edited)

I got a ATR43 from hypergear for my r33 with a neo, rb specific to 600hp but external gate. Fitted but not ran yet or tuned, nice guy to deal with, very helpful and always has time for your stupid questions [emoji16]

Seems like a decent turbo, not flash looking if you like the whole bling shit, looks more like standard turbo which is perfect for my build.

I'll post up results when I figure out what ecu I'll run

Edited by Gcjosh
Cowboy1600 Grand Master

Cowboy1600

Posted
Posted

Go Hypergear. Quality gear, great value and Stao is terrific to deal with.

I've got the ATR43 G4. Currently intercooler limited @ 240rwkw. Plenty left in it. Hoping for 310ish once I settle on a new cooler. It's a big turbo so comes on late, but I have no issue with it as it's on my toy car. If it was on my daily I would go the SS2.

hypergear Grand Master

hypergear

Posted
Posted

Our ATR45SAT model is a new turbo engineered to suit an RB25det NEO motor. That makes the same power and response as an externally gated T67, but internally gated bolton to factory setup. Just make sure you've got an big exhaust. Dyno readings of it is at the dyno section.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...