Jump to content
SAU Community

Recommended Posts

Yes that rasp and the volume does seem to indicate a complete absence of any baffles and sound absorbing materials... The sound is litterally just bouncing around the pipes...

Certainly explains the touchy throttle with no restriction.

When I had the stock turbo, I'd be on boost reversing up driveways.

100 cell cat fitted today as there was none, a tad quieter but not much.

Less rasp. Next to zero loss in performance.

The mufflers looks as new, no evidence of cutting open or modification.

I did a poke inside the rear muffler to feel for baffles and/or walls.

It appears completely hollow.

It's looks the same system as Luis.

The previous owner told me he went for a straight through option on the exhaust.

Anyway, still have AMPerformance intake to stick on, then tune. Probably be louder again.

  • Like 1

Certainly explains the touchy throttle with no restriction.

When I had the stock turbo, I'd be on boost reversing up driveways.

100 cell cat fitted today as there was none, a tad quieter but not much.

Less rasp. Next to zero loss in performance.

The mufflers looks as new, no evidence of cutting open or modification.

I did a poke inside the rear muffler to feel for baffles and/or walls.

It appears completely hollow.

It's looks the same system as Luis.

The previous owner told me he went for a straight through option on the exhaust.

Anyway, still have AMPerformance intake to stick on, then tune. Probably be louder again.

Intake will change bugger all.

It's already metal; all you're doing in putting a bigger pipe down to the same inlet restriction.

  • 1 month later...
  • 3 months later...

Is that for the 2.5 and 3.5 litre motors ? My flanges are badly rusting and figure I'll be needing to do something soonish and I've got the 3.5...

All NM35 (VQ25det) cat-back exhausts will fit a PNM35/PM35 (3.5L) without modification.

The M35 (VQ25dd) utilises different hangers for the rear muffler for whatever reason.

  • Like 1
  • 1 month later...

ok sorry revisiting this again.

People are constantly commenting how loud my car is so back to work on it.

My exhaust is Legalis R, twin 83mm tips. Fujitsubo stamp on the rear muffler

Rear muffler is straight through with a perforated inner skin. (Boomer)

I can see the inlet with a torch.

Internal outlets look 50mm then flare to 83mm

Can anyone confirm this is the genuine design for this system ?

Thinking of fitting a chambered rear if it won't be too restrictive..

thanks

 

Are these car people or just general population?  As someone not into cars may think anything louder than a prius is too loud.

It's possible yours may have been modified as I have a freeway dolphin dump and front pipe, into a fujibutso legalis R and it's very quiet a full turbo back 3inch. I also have a 7m powered soarer with 3inch kakimoto exhuast which sets off car alarms it's so loud in comparison.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...