Jump to content
SAU Community

Attn: R33 Gtr Owners - Full Length Cooling Panels Group Buy


Recommended Posts

Omurru, Terry has the panel but won't be fitting until end of this month

so it'll be best to wait and i can show pictures of fitment or if there are any fitment issues, i can relay to the factory so they can fix the mould.

Currently there are 6 interested for R33 panel and 3 for the R32 panel.

I'll be happy to take pics as soon as the panel is fitted (after my 100000Km service and installation of the Nismo plenum).

Sorry, but I didn't want tools put on it.

  • 3 weeks later...

It's a superb piece of carbon. Thank you Elv.

Terry-102_zpsywojx1r1.jpg

 

One small hole had to be drilled for a support for the N1 Oil Cooler, which you guys probably won't have.

Terry-98_zps1wgjdbhr.jpg

  • Like 1
  • 3 weeks later...

Hi All,
Just received update from Factory that i should be receiving the parts before Christmas if not before New years.

I will keep you guys updated.

I have the week off for work so will be able to package them up and send out without any delays :)

  • Like 1
  • 2 weeks later...
  • 2 weeks later...

hi guys a minor update here,

it has left the factory today so hopefully no xmas/customs delays and I can get it late next week. and should be good to start shipping out after boxing day.

Will update once they have arrived and contact everyone via PM.

 

thanks 

  • 2 weeks later...

Good news guys,

the packages arrived today.

so will start unboxing and checking for damage and PM's sent over the next few days, due to the NYE holidays, won't start shipping out until after middle of next week once payments have cleared.

 

 

  • 2 weeks later...

the factory sent me r32 panels so i have 3 of them left over if anyone is interested.

for everyone who purchased a panel, they have all been sent.

thanks

 

  • Like 1
On 1/16/2017 at 9:31 AM, dori34 said:

the factory sent me r32 panels so i have 3 of them left over if anyone is interested.

for everyone who purchased a panel, they have all been sent.

thanks

 

I'm interested in the R32 ones. Price and pictures please??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...