Jump to content
SAU Community

Changes To Import Laws - Good Or Bad?

No Crust Racing
 Share

Recommended Posts

No Crust Racing Grand Master

No Crust Racing

Posted
Posted

As per Iron Chefs FB post linking to this article - http://www.theguardian.com/business/2016/feb/10/australians-to-bypass-car-dealers-and-import-directly-from-japan-and-uk

Are we all expecting that to have a good or bad impact on import prices?

Easier access will hopefully mean more competition, but more demand might also see prices not drop.

I wouldn't mind an R35 down the track and I'm guessing they will be cheaper for us under this scheme, but in turn that will drop the value on my 34 perhaps.

Link to comment
https://www.sau.com.au/forums/topic/462833-changes-to-import-laws-good-or-bad/
Share on other sites
ShortCircuit Collaborator

ShortCircuit

Posted
Posted

Can somebody please clear this up for me? I'm a little confused after reading the article.

The 12k (approx) import duty is going to be removed...is this only on cars that are over 25 years old?

No Crust Racing Grand Master

No Crust Racing

Posted
  • Author
Posted

JPY9.6 million for 2016 gtr

Much better than the ludicrous local price

A few R35 owners are going to see some rapid depreciation.

I wonder how much of an issue the lack of localisation will be (switch gear etc) or more importantly how quickly the aftermarket will fix that issue.

  • Like 1
rehab2010 Proficient

rehab2010

Posted
Posted

JPY9.6 million for 2016 gtr

Much better than the ludicrous local price

But you'll still have to pay LCT, GST and stamps,plus rego,transport costs. You'll also lose some on the money exchange. You'll quickly find that the Aussie prices of R35 are pretty spot on, ie not a rip-off.

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Mark X for me :)

Yep, it does looks nuts. Finally a Toyota that looks cool.

http://gazooracing.com/pages/gs/markx/

$53k at todays exchange rate for 3.5l motor but I haven't factored in bringing it to here maybe add $10k?

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

I've been doing a bit of reading, it seems all everyone cares about this scheme is cheaper cars that's already available here.

I reckon we should get excited to the fact we can get some cars that aren't available here originally like latest Civic Type R, Seat Leon Cupra (heaps better than Golf GTI), Mark X, Alphrad, Vellfire and such.

I'm sure there'll be more cars out there that people will want.

  • Like 3
GH05T Grand Master

GH05T

Posted
Posted (edited)

i would like to see what actually happens with LCT,

im in the auto industry and lct is a huge player for cars.

at the moment LCT needs to be paid ON NEW CARS, but the grey area which we play, a used car does not pay it but if a "demo car" is registered under a dealer the lct flows down to the first owner, but a used car does not apply, so its the first registered owner of the "new car"

so if a used car (500km 12 month) car comes from japan, i dont know if LCT will be applied or not, big difference if you wanted to buy a $300,000 car for instance.

hopefully the actual effect is not against the dealers but the manufactures. they might need to stop charging the Australian market (the retailers... not the consumers) more for cars that are sold cheaper overseas. its not the dealers fault that we get a higher price, we do not make more money that our overseas counterparts, their are not higher margins, probably lower.

we are the P'platers of the world market, we get what we are given and that is a small part of the available line up and we generally miss allot of the specs given to all ofther countries, Then we are charged the Australia tax because we have no choice.

if a Nissan dealer can finally sell their cars for the same price as japan, im sure they would be happy. it also means that they will give us models we couldn't not get before due to pressure of lost sales from the dealer groups.

i once spoke to a Nissan high up from japan through, we complained that we couldn't get certain models that that Australia should be looked after he response was this.

we can make our entire year of Australian delivered vehicle in one day, if the Australian market became to hard to deal with, we can just take a day off"

as a jap import consumer, its all sorts of giddy good news, but im honestly hoping, from an Australian industry point of view that it dosnt become damaging, because it has the potential to go either way. its defiantly going to cause some adjusting and i hope it does create a free'er more open, consumer driven market. but spare a thought for the businesses behind it which may get damaged.

Edited by GH05T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...