Jump to content
SAU Community

Recommended Posts

Im getting the drive shafts repaired and the Skyline run on a dyno this Thursday as I have got my supra FMIC from ebay. If the result is impressive, I'll post. If not I'll be hoping that no one has viewed this post.

The guy doing it is Marcus Blythe from Flow Tech EFI in Greensborough.

Link to comment
https://www.sau.com.au/forums/topic/46358-hr30-on-the-dyno-this-thursday/
Share on other sites

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Oh shit, I've just looked at the intercooler and it has had a 5 cent modification, (looks like somone ran 5 cents down the cooling fins) Wanker on ebay said 'great condition'. The seller is Tominien or something like that.

Besides that it doesn't fit properly, i'll need some pipe work. Still get it tuned anyway.

And the result is 207rwkw!!!

Apparently it is an after market turbo but was leaking pressure because it wasn't sealed properly when fitted and was leaking the hotter it got.

So the guy resealed it tuned it properly and it is producing 207rwkw running 18psi at 6200rpm.

Then the president called me up and asked me how to fix the whole Iraq situation and while on the phone I heard a womans cry for help and it was Lois Lane, she was stuck in a car while an earthquake was going on then time went backwards and superman came and rescued her....

Sorry, had to make up a story as it isn't ready yet. I am so full of shite :)

And the result is 207rwkw!!!

Apparently it is an after market turbo but was leaking pressure because it wasn't sealed properly when fitted and was leaking the hotter it got.    

So the guy resealed it  tuned it properly and it is producing 207rwkw running 18psi at 6200rpm.

Then the president called me up and asked me how to fix the whole Iraq situation and while on the phone I heard a womans cry for help and it was Lois Lane,  she was stuck in a car while an earthquake was going on then time went backwards and superman came and rescued her....

Sorry, had to make up a story as it isn't ready yet. I am so full of shite :)

all righty then??

I'm guessing you'd be an annoying prick to work for... :) lol

I'd be interested to hear what it makes too, don't mind the ol' 30s :D I'm a bit behind the 8 ball, what's done to it? So far I know it has flash custom driveshafts and modded FMIC :D

and the moment you've all been waiting for. Here are some pics. It is really dirty so I'll clean it one day and put it up.

I wouldn't say I am annoying to work for..... more just a little misunderstood, I like to laugh like a mad scientist every now and again to keep the employees on their toes... :)

Got to wait until Monday, Those hot diggity darned drive shafts are a prick to get rebuilt and given how shagged they were, Marcus didn't want to flog them on the dyno until they were rebuilt, so I have to wait until Monday. I knew he didn't realise how much of a pain in the arse they are to get, but he called me and told me he'd have them Monday @noon the latest.

Good news is the intercooler is in and he has hotted up a shit load of R31's and VL's Turbo and Atmo.

Hey, a bit more positive feed back on the $150 mag wheels wouldn't go astray ;) I stuffed around for ages trying to get the size of the pic files small enough to get on this thread!!

Driving a VT wagon until then, biggest POC on the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...