Jump to content
SAU Community

Recommended Posts

Car is in with the mechanic now - major loss of power + shaking.

Multiple things need doing but the important one at the front of the car is the Turbo.

From what they have said something about a wastegate actuator is stuck open and won't close? I'm sure that means something to others and as a result the entire Turbo probably needs replacing. It's making no boost.

They're getting back to me tomorrow for prices on a bunch of stuff but I'm a bit iffy on the Turbo. I was under the impression that a replacement for the M35 Turbo is hard to find and that is why most people rebuild.

How hard is it to get a replacement Turbo as opposed to a rebuild?

EDIT: It's about 50/50 that I'll even bother repairing at this stage though, rear shocks need replacing, a bunch of seals etc, coilpacks, turbo. If it breaks over 4-5k then the car is going to be sold as scrap.

Edited by LordMidol
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/
Share on other sites

rear shocks need replacing, a bunch of seals etc, coilpacks, turbo. If it breaks over 4-5k then the car is going to be sold as scrap.

up to you, most people install coilovers anyway and coil packs/spark plugs will probably sort the shaking and running like shit (if its a misfire).

going to have to be a bit more descriptive than "a bunch of seals".

if you're not interested in doing any of the repairs yourself, i would at least take the list from this workshop and get a second opinion.

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710129
Share on other sites

Spoke with my brother who is an apprentice mechanic and he'll help me out if I want to.

He questioned why I'd replace the entire turbo and not just throw an external waste gate on? The fins in the Turbo are fine, it's just the wastegate won't close.

I'm in Brisbane now.

Regarding the seals I don't actually remember, but they were kind of an afterthought in the discussion so I gather that's a cheap fix. The bulk of the discussion was on the Turbo, Shocks and Coilpacks. I think he said #6 needs to be fixed and is responsible for the shaking of the car so that'll fix that side of it but he also said to replace all 6 at once.

The Turbo he said is not boosting at all, zero boost.

Depending on the prices I get tomorrow I'll probably get them to take care of the Coilpacks and then hand the rest over to my brother. My partner is kind of at the point where she'd rather bin the car if it's more than 4k. I'm not having much luck convincing her that spending 4k on repairs is still better than spending 25k on a new (second hand) car...

Edited by LordMidol
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710152
Share on other sites

Hit up Scotty for a wastegate actuator upgrade! Install it and Problem fixed!

You would have little to no room for an external gate and if you did and are still running the stock internally gated turbo what's going to control that?

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710172
Share on other sites

Ha, my bro has been an apprentice for 2 months I think. I more meant I have access to a workshop and he can help me rip parts out etc. He didn't just say "an external wastegate" but I'm not mech minded so cut it down.

I've no idea what the wastegate actuator upgrade from Scotty is but I sent him a PM - if it fixes the issue and it's less than upgrading the turbo then it's a done deal. My car has 210,000km on it now so I'm surprised the entire Turbo is still alive but it is.

Thanks to both of you for the info :)

Edited by LordMidol
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710263
Share on other sites

Ha, my bro has been an apprentice for 2 months I think. I more meant I have access to a workshop and he can help me rip parts out etc. He didn't just say "an external wastegate" but I'm not mech minded so cut it down.

I've no idea what the wastegate actuator upgrade from Scotty is but I sent him a PM - if it fixes the issue and it's less than upgrading the turbo then it's a done deal. My car has 210,000km on it now so I'm surprised the entire Turbo is still alive but it is.

Thanks to both of you for the info :)

no worries mate yep Scottys actuator upgrade is a 1bar actuator with and adjustable arm will bolt strait into the turbo with the 5mm bracket he does. If your turbo is still running sweet and it's just the diaphragm in the actuator is gone that's all you should need! Scott will sort you out mate [emoji106] hope you get it all sort at a decent price would be a shame for absorber one to be sold off for bits there no that old and a great car!
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710514
Share on other sites

Some mechanics will say the turbo needs to come off to replace the actuator as access is difficult.

If that's the case you'd want to consider a rebuild anyway with 210000 kms on it

Ask your mechanics if they can try and fix it in place

I read somewhere a genuine Nissan replacement is over $2000 just for the turbo.

High flow service for $1200

Turbos are like tyres, you just have to replace them when they are worn.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710572
Share on other sites

If your current turbo is stuffed, yes it will be worth it as u don't really have another option other than brand new Nissan or roll the dice with second hand (not advisable in a stag, due to difficult access for removal). I would suggest the smallest possible high flow. That should work well with stock setup. It will be a little laggier but that's the way it goes. Before you do anything, get a proper diagnosis. You don't want to be waisting money on things that aren't required. If it is indeed your wastegate stuck open, that will be the issue of no boost and the turbo itself is probably fine. I had a similar issue on a different car and it wouldn't make boost until 5k rpm. Fixed the waste gate issue and was boosting perfectly again. Good luck.

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710772
Share on other sites

Yep - still wanting for them to give me a call. If it's just the wastegate stuck open then for now I'll just look at fixing that. There is definitely no boost but I the Turbo itself is making no funky sounds and I specifically asked if the fins were okay and Nissan said they were but I'll need to look myself so I'll take the car up to my brothers, try and get the Turbo out and see what is going on.

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710790
Share on other sites

Nissan advised me to find my own shocks and turbo - think their parts guys wanted $2700 for a new turbo. They did find lots of cheaper options but business rules mean they have to go through their set suppliers and can't do random repairs.

All up what they are doing is $1900 which includes a service, diagnostics (I think about $300 or so is diagnostics). I have already forgotten what some of it is but it includes replacing the Coilpacks (including 6 spark plugs), something about my transmission manifold, full oil change in the transmission and a few other bits and pieces.

Happy to pay that to them and then I'll get the Turbo and Shocks sorted on my own.

Edited by LordMidol
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710877
Share on other sites

Always had it done at Nissan - tried a few independent guys and they took too long and didn't provide courtesy cars or provided courtesy cars that were from the 1970s.

We have one car and my motorbike with a 1 year old. We need a car, combining independents being slow + no courtesy car means they have to come in a lot cheaper to make up for the inconvenience of me having to go and hire a car.

Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7710917
Share on other sites

DrLui is wrecking his stolen M35 here.

Grab his shocks.

I wouldn't go to Nissan unless I had a new car under warranty.

Look what they charge for an AFM

Find a mechanic who has a passion for performance cars and is known for their good work. ;)

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7711027
Share on other sites

I'll speak with DrLui and see about his shocks.

Got the car back today. Turbo feels fine tbh. If it's broken it has been broken since I got it. I'll take it to my bro and we'll remove it but I'm not sure what I'm looking for so we'll see what we find haha.

All up I had the oil changed, oil filter, few lights in the rear fixed (brake light and normal light), all 6 spark plugs, all 6 coils, two gasket rockers, new gasket oil pan, full transmission flush with new fluid, bunch of hoses replaced with hose clamps etc and it came to just under 2k. Probably could have done it slightly cheaper but it's running well, gear changes are super smooth.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/464157-m35-turbo-q/#findComment-7713053
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...