Jump to content
SAU Community

Brembo Brake Upgrade - R32 Gtr

Minko
 Share

Recommended Posts

deongster Mentor

deongster

Posted
Posted
16 hours ago, Duncan said:

I'm very happy with my similar setup on the race car, I've run up to 1hr enduro races on them and targas etc with no issues. These are a bargain at the posted price even if they need a reco

Pads easy to find? Good ones? or need some searching around?

Duncan Grand Master

Duncan

Posted
Posted

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

 

  • Like 1
deongster Mentor

deongster

Posted
Posted
I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd
 


Thanks Duncan. Will definitely have a think!
Minko Collaborator

Minko

Posted
  • Author
Posted
2 hours ago, BunsenBurna said:

Minko the forum tells me you can't receive messages!

Have deleted some messages - hopefully works now?

 

No issues with brake bias, car was run on street, circuit, street sprints by myself and previous owner and setup was perfect.  

 

V28VX37 Veteran

V28VX37

Posted
Posted
On 11/01/2017 at 8:10 PM, Duncan said:

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

Duncan sorry to bombard you but since you're the expert on this setup, have you run this ok with ABS?

Also with the dog bones/adapters, any chance they would suit R34 GTT or would you need to re-drill or re-tap them or the uprights? From memory R32/33 might be 12mm bolts whereas 34 is 14mm (or vice versa)?

Duncan Grand Master

Duncan

Posted
Posted

c'mon guys this is a for sale thread not a brakes discussion. I wanted to add some information which might assist the sale but seriously, at $800 this is an awesome deal.

I still run ABS in the race car, I have no balance problems or ABS issues although I have chosen to run different pads front and rear.  The seller would have to confirm details about the bracket but the one on mine is an excellent piece of 5mm steel angle. Obviously I don't know bolt size on this sale but if it is larger than your hub (ie M14 into M12 hub) you could drill out the hub easily, and if the bolt is smaller than the hub size (ie M12 into M14 hub) then you could do nothing (because it will be fine once torqued) or use 12-14mm sleeves if you are concerned.

  • Like 1
V28VX37 Veteran

V28VX37

Posted
Posted
At least one offer has been made pursuant to the recent discussion so good result I'd say...
Seal kit anyone?!

See page one of this thread for the seal kit :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...