Jump to content
SAU Community

Rb Engine Parts, Blocks, Cranks, Forged Parts Shed Clearout

adam Foster
 Share

Recommended Posts

adam Foster Mentor

adam Foster

Posted
Posted

Hi Guys,

We are cleaning out a shed full of RB Parts.

RB26 blocks $400.00 Each from standard bore to oversize. 3-5 to choose from

RB30 Blocks A8 Turbo $400.00 Each from standard bore to oversize. 3-4 to choose from

RB26 Cranks - Longnose $400 short nose $175

Arias RB26 Standard bore (86mm) Forged Pistons (set) good condition $300.00 ony need rings.

CP Pistons For a RB30 Block and RB26 Head (set). To Suit 86.5 oversize bore. with rings and pins $500.00

Spool RB30 Rods good condition (set) $500.00

Mahle for a RB30 Block and RB26 Head. To Suit 86.5 oversize bore. 5 out of 6 are band new 1 got damaged on the machine cutting clearances for the oversize valves. $400.00 - it will cost $200 for 1 new piston the set is worth $1200.00 new.

HKS Pistons for a RB26 87mm with rings and pins (set) $400.00

ARP RB25 Head Stud Set - $150

Greddy RB fuel rail $50.00

New Sets of Bearings

heaps of other stuff

twin turbo dump pipes HKS and Stock 34 GTR Dump Pipes

I can freight Australia wide. location Newcastle NSW

contact Adam - 0449 664 330

IMG_3299.jpg

IMG_3280.jpg

IMG_3282.jpg

IMG_3284.jpg

IMG_3285.jpg

IMG_3286.jpg

IMG_3301.jpg

IMG_3290.jpg

IMG_3294.jpg

IMG_3296.jpg

IMG_3297.jpg

  • 5 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...