Jump to content
SAU Community

Recommended Posts

Ayo,

Full acceleration, anywhere over 3.5k revs causes my afr to completely overfuel itself. (I have searched many other threads but I feel mine is slightly different). Applying only 75% throttle however it accelerates great and smooth. What are some culprits I can address to try and smooth out this AFR under full load? I have brought my RB25 back to absolutely 100% stock everything, no aftermarket BOV, stock SMIC, stock turbo setup, stock Airbox, everything is stock. Still running a 2.5" exhaust as my partner and I enjoy communicating whilst driving.

I have just purchased:

- a new ignition loom (wiringspecialties)

- NGK Copper BPR6 1.1mm gap plugs

Other than those two obvious ones, the possibilities then open up a whole new branch of things. Fuel Pressure? Coilpacks? Leaking BOV? Would a leaking BOV be capable of throwing off an AFR that much!? Please, I'm sure a lot have been through this. I'm able to upload a video if that may help.

I take it you have installed a wideband afr meter? All RBs seem to run rich - I don't know if yours is worse than average. Check for boost leak like Ben says and maybe clean your AFM.

Give the AFR's you are see seeing and under which conditions. It may not be rich

The only 2 things that cause over fueling are too much fuel or not enough air

What causes that will be the bigger question. Tune, losing air out of the system post AFM, 1 or more dud injectors

More info needed

Boost leak. Do a pressure test to find it.

Close the gap on the plugs down to 0.6

Will run a pressure test in the morning. It always seemed to run rich, but it one day seemed really bad. Closing the gap will what? Help combustion even when there is an incopious amount of fuel spraying in? If this solves the issue is it unsafe to leave it at 0.6?

The need to shut down the gap on a spark plug (in a stock engine) is generally indicative of a poor spark (coil). Try a new set of either factory or Splitfire coilpacks.

The spark plug heat range for a stock 33 is a 5, so try a set of BP5nnn plugs, 1 - 1.1 gap.

Get the injectors cleaned.

Edited by blind_elk

Try a new set of either factory or Splitfire coilpacks.

Thanks for suggestion, I was already thinking of heading down this path but wanted some reinforcement before I paid the $700 bucks (again). On my S2 motor I had Splitires but they don't mate with my S1 (as everyone knows).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
×
×
  • Create New...