Jump to content
SAU Community

Hank's Brap Brap RX-8

Hank Scorpio

By Hank Scorpio,
in Motorsport Builds

 Share

Recommended Posts

Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

As many of you are aware for a few years now I've been bitten by the rotary bug, they're not for everyone but I love 'em!

So quite some time ago I purchased myself a JC Cosmo with a factory 20B in it, I had the motor built by local rotary gurus 'Rotomotion' (GT4202R, dowelled, bridgeported etc.) and it made a bunch of power which was great. 2 years ago at RaceWars 2014 my tailshaft let go and I destoryed the back of my gearbox, since then the Cosmo has not been driven :( The Cosmo was in pretty poor condition and the dream ever since has been to buy an RX-8, drop the 20B in and go racing, good chassis + good engine should mean a fast car!

So last Saturday I finally got my hands on a car I wanted in my budget, picked up an un-registered RX-8 roller and thus my first proper motorsport build has begun!

As you can see I purchased the car with no engine or box so that is alread taken care of for me, I now have the car in the corner of the workshop and I'll probably start stripping it down soon.

RX-8.jpg

engine bay.jpg

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/465765-hanks-brap-brap-rx-8/
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
  • Author
Posted
1 hour ago, r32-25t said:

I thought you were building a street car with it

Nope, un-rego'd shell.

Sure I might chuck the trade plates on it but ultimately I'd like to take it to the track.

Victory Mentor

Victory

Posted
Posted

Welcome to the RX8 family.

My daughter has had a Series II RX8 for the last two years and I have spent many hours during that period servicing and upgrading it.

Dimension wise it is very close to my R33 GTR in wheelbase and track. The front and rear brake disks are also the same size as the GTR.

They are a strange animal to drive with a 50/50 weight distribution compared to our nose heavy Skylines. Braking, turn in and mid corner grip is amazing it is just the lack of power to drive out of corners like a Skyline that they lack. The installation of a 20B would go a long way to fixing the lack of punch.

In the US there are a number of kits to install a LS series motor and box from the new Corvette into the RX8 - that really gives them some punch. The kits are that detailed that they run the Corvette ECU to run the engine and then splice all of the sensors back into the Mazda ECU to run the dash and all of the systems. A friend has done this conversion in a FD RX7 and it is that seamless of a conversion that it looks like it came that way from the factory.

Subscribed to your thread to follow your progress.

Hank Scorpio Grand Master

Hank Scorpio

Posted
  • Author
Posted
13 hours ago, Victory said:

Welcome to the RX8 family.

My daughter has had a Series II RX8 for the last two years and I have spent many hours during that period servicing and upgrading it.

Dimension wise it is very close to my R33 GTR in wheelbase and track. The front and rear brake disks are also the same size as the GTR.

They are a strange animal to drive with a 50/50 weight distribution compared to our nose heavy Skylines. Braking, turn in and mid corner grip is amazing it is just the lack of power to drive out of corners like a Skyline that they lack. The installation of a 20B would go a long way to fixing the lack of punch.

In the US there are a number of kits to install a LS series motor and box from the new Corvette into the RX8 - that really gives them some punch. The kits are that detailed that they run the Corvette ECU to run the engine and then splice all of the sensors back into the Mazda ECU to run the dash and all of the systems. A friend has done this conversion in a FD RX7 and it is that seamless of a conversion that it looks like it came that way from the factory.

Subscribed to your thread to follow your progress.

Thanks Charles, from the Gong as well!

One of the reasons I wanted the RX-8 was because it has a great chassis. It's a fair bit more modern in design than an FC or an FD (or say a Skyline), lots of available aftermarket parts as they were sold locally in Japan, Australia and the USA and it should be made to be really good around corners. A nice set of coilovers, swaybars, strut braces, underbody bracing and eventually a cage should make it turn on a dime.

Luckily for me I have the ECU, wiring and Microtech out of the Cosmo, between that and what's left in the RX-8 I don't imagine it will be too difficult (in the scheme of things) to get everything running nice. And putting a rotary into a car which already had a rotary in it obviously makes things a bit simpler again.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...