Jump to content
SAU Community

Recommended Posts

Hi All,

I recently got a full set of MCA X-R series coilovers supplied and installed on my R32 GTR by a reputable suspension place in Sydney. 

Left rear coilover is knocking on almost every single bump. The mechanics knew there was a knock and checked over every nut and bolt related to the suspension. All seemed fine.

They are currently ordering a new replacement set for the rears as there is possibly something loose within the coilover assembly.

Just wondering has anyone experienced a similar issue with MCA coilovers?

Also any advice to somehow soften the ride slightly. Sydney roads are horrible and the standard setup is a bit too bumpy for my liking.

Cheers

Kase

Link to comment
https://www.sau.com.au/forums/topic/465766-mca-coilovers-knocking/
Share on other sites

I recently bought a set of Reds off MCA direct about 1-2 weeks ago (beginning of July), Josh at MCA he advised me they had a batch of shocks which had developed a slow leak over time;

also just a heads up.. we've had a couple of small gas leaks from some shocks made around the time yours were.. It was pretty rare, and I think yours will be ok.. but just letting you know incase you do hear some loud-ish knocks over large bumps/potholes, just let me know and I'll send a replacement for which ever it is straight away.

 

Also as the Reds are dyno tested and individually checked, I asked if that process would catch these leaking shocks.

slow gas leaks not really

i'm talking a drop of a few PSI per day type of thing, and they get gassed with 270ps

 

Regarding the harsh ride, MCA are happy to exchange a set of springs with your set up free of charge within the first few weeks of install, ask their  advice direct as to what would be a step down to increase comfort?  You could also opt to buy a second set and keep your originals for the track and swap between them as you need.

What i did was buy 2 sets of springs, the ones on the coilovers are set-up for street/tarmac driving, and a second set of stiffer springs to suit circuit events should i choose to do them.

Edited by squareznboxez

Incase you didn't get to see my edit,

Regarding the harsh ride, MCA are happy to exchange a set of springs with your set up free of charge within the first few weeks of install, ask their  advice direct as to what would be a step down to increase comfort?  You could also opt to buy a second set and keep your originals for the track and swap between them as you need.

What i did was buy 2 sets of springs, the ones on the coilovers are set-up for street/tarmac driving, and a second set of stiffer springs to suit circuit events should i choose to do them.

  • Like 1
3 hours ago, djr81 said:

You realise that changing out springs is quite an exercise and quite honestly too much of a pain in the arse to do for a track day?

What Spring rates do you have anyway? Hoping they are around the 6 &5kg/mm mark front/rear but I fear otherwise.

Fair call, i did figure for the extra $50/spring it was worth to have as an option.  Below is Josh @ MCAs feedback for my set.

2. Yes I think the extra springs is a very good idea because these springs would be a bit lacking on a circuit when pushing hard.  What tyres would you run on a circuit?  My normal circuit setup would be 15kg front and 11kg rear.

So we'd be going with with a Red Series setup, valving wise I'm thinking a near circuit setup on the front to help with the support of the car, but a bit softer in the rear to help with the ride quality and bump handling.

Spring rates of 12kg front and 5kg rear, along with another pair of 14kg front and 10kg rear assuming you wont be on a tyre like Hankook Z221 or Advan A050 for the track.. if you are, we could go 15/11.


These haven't been installed on the car yet, so i don't have any real feedback to offer, that being said MCA did model specific testing with a R34 GTR (running stock sway bars/bushes) to develop their valving codes and spring rates for that chassis.  That being said for reading i believe there are 2 trains of thought when it comes to spring rates/valving; one being the valving controls the body roll, and other using the springs to control body roll.

MCA BNR34 2.jpg

MCA BNR34.jpg

Edited by squareznboxez
7 hours ago, djr81 said:

You realise that changing out springs is quite an exercise and quite honestly too much of a pain in the arse to do for a track day?

What Spring rates do you have anyway? Hoping they are around the 6 &5kg/mm mark front/rear but I fear otherwise.

This.

Depending on how many track days your doing, how serious you are and whether you do the work yourself it would mean booking the car in to your suspension shop before the track day to get springs swapped and a wheel alignment and then you would need to do it again after said track day.

How many times a year do you want to do this and how much money do you want to spend at the shop?

Of course it also comes down to whether you daily your car, how many kms you do on what sort of roads and how "hardcore" you are.

Now bare in mind I work at a suspension workshop, our owner has 2 MX-5s and 3 sets of coilovers between them, yes we have played with spring rates but does he plan on constantly changing them before/after everytime he goes to the track? Hell no he doesn't.

I'm currently going to keep the MCA X-R series coilovers. Main thing is to address the knocking as this also may affect the overall suspension feel on the car.

The car is booked in for tomorrow to change over the rear coliovers. I'll let you all know how it all goes and if any adjustments were done to the dampers to slightly soften the ride. Might not be required.

On a side note, the car is sitting relatively low but the tyres don't scrub, so I don't plan to change the springs. Scrubbing may occur if I put softer springs in...

 

On 7/13/2016 at 0:49 PM, pureplaya said:

Also any advice to somehow soften the ride slightly. Sydney roads are horrible and the standard setup is a bit too bumpy for my liking.

Adjust the dampers? not rocket science

1 hour ago, Hadouken said:

If I'm not mistaken they allow 2kg either way adjustment on springs.

Yep, would have thought the valving adjustments on the shocks would easily allow for this. There's generally a big difference between full soft and full hard.

Got the car back from V-sport and they did a fantastic job. Both rear coilovers were replaced and dampers adjusted. The car feels great!!!!

Current setup is:

MCA X-R series coilovers

Front damper - 4 clicks,   Rear damper - 6 clicks

Front Springs - 180mm 10kg,   Rear Springs - 220mm 4.5kg

Ride height (centre of wheel to guard) - 345mm both front and rear

20160715_133707.jpg

On Friday, 15 July 2016 at 0:49 PM, pureplaya said:

Got the car back from V-sport and they did a fantastic job. Both rear coilovers were replaced and dampers adjusted. The car feels great!!!!

Current setup is:

MCA X-R series coilovers

Front damper - 4 clicks,   Rear damper - 6 clicks

Front Springs - 180mm 10kg,   Rear Springs - 220mm 4.5kg

Ride height (centre of wheel to guard) - 345mm both front and rear

20160715_133707.jpg

Wow, they put a 7" spring in the front?  I couldn't work out why they used such a hard spring but I guess if you only have a 180mm to play with you are going to need a big number.

Hmm, on looking up an Eibach cattle dog the 7" 10kg 2.5" od spring has a travel of 100mm which leaves about 50mm once the car is on it.  So better than I thought and probably not much different to a lot of setups.

Still 10kg/mm & 4.5kg/mm is a big gap when you have a car that understeers and has four wheel drive.

Edited by djr81

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...