Jump to content
SAU Community

Recommended Posts

Hi SAU,

My car has a bit of a checkered past. The PPSR checks out OK and I've got all the import, compliance and other paperwork, so happy about that. The compliance plate is no longer under the hood but overall the car is in excellent shape with a roadworthy coming. That means a date with VicRoads is coming... It'll also be popping my cherry at VicRoads too and not being through it before I'm not sure what to expect.

Wanted to ask your experiences (re) registering a car?

Cheers!

It's a mixed bag mate - you can get a shit inspector or a good one; luck of the draw. Have had pains in the ass who kick up a fuss over the first few digits of the chassis number missing from the stamping (normal for older Skylines [R33 and older etc.]) and wanted us to get a workshop to stamp the missing digits in (like that proves or changes anything?).

Have also registered a car that turned up on a tow truck with a savage bottom end knock and a bazillion mods.

Just do everything you can to eliminate getting knocked back. Why is the compliance plate missing from the car? Not 100% but I feel like you could get knocked back for that even with the paperwork.

Just do everything you can to eliminate getting knocked back. Why is the compliance plate missing from the car? Not 100% but I feel like you could get knocked back for that even with the paperwork.


The compliance plate might be a sovereign for someone that... ummm... "borrowed" it. Any ideas how to go about getting a compliance plate reprinted? Checkered past right. The thing on my side is the car checks out.

There are no mods, asides from an exhaust, that they'll see. So it sounds like luck of the draw then.

I would pick up the phone and talk to a compliance workshop, as they'll know what's required and may be able to produce another one for you, even if for a fee. I feel like it'll be a barrier to re-registering a car, considering they can kick up a fuss over things that are the way they are supposed to be anyway.

  • Like 1

I registered my R32 GT-R for the first time in VIC a year ago. Had been deregistered in NSW 6 months before. In the interim, I had an engine swap performed (another RB26 so no big deal) and no other earth shattering mods.

I was late to the VIC Roads appointment due to a flat battery (of all the crappy luck) but had every scrap of paperwork in order (I am a touch OCD) so it went through without a hitch. Other than having to google search on my phone to show the inspector where to find the engine number. But again, no big deal.

Have all of your paperwork in order. If there are discrepancies in the car's history, ensure that you have supporting doco.

  • Like 1

1. Receipt / Contract of sale for the car including sellers full name, address, VIN, KMs, date of sale, price, serial number. I called Vicroads and they were super helpful (no joke) to find out what was needed.
2. Receipt / Contract of sale for the engine (details as above)
3. Scanned copy of sellers driver's license
4. VIC RWC
5. Insurance policy
6. Vicroads paperwork completed in full (this smoothed the way when I was late)
7. Temp Rego to drive from worshop to vicroads.
8. Proof of my identity
9. Bolts etc. to affix plates.
10. NSW dereg papers

18 hours ago, Robzilla32 said:

1. Receipt ......

Cheers.  I've got all of that.  I'll work on the compliance plate and hope for the best!

6 hours ago, Leroy Peterson said:

nothin suss

Ha!  Made me laugh :)  I'm the legal owner.

Document 26 - Roadworthy Requirements - of the Vehicle Standards Information on page 10 has something like "Compliance plates are often damaged, lost or stolen.  They are not a requirement for a roadworthy certificate".

 

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...