Jump to content
SAU Community

Recommended Posts

Small upgrades on a r34

Hey guys! i have recently just bought a 4 door R34 Skyline that is turbo. this car has a automatic transmission and has done roughly 210kms.. as this being my first car, i have a few questions about the car that i would love to be answered! 

Pros and Cons about the car apart from it being a auto xD (Reason to it being auto i bought this car for really cheap so it was hard to say no to such a pretty car) 

Main things that are important to know about owning a Skyline

What small modifications would you recommend having? and why? 

I was also thinking of buying a blow off valve for her as i have heard that its healthier for the turbo

Thank you for your time :)

- Hudson

Link to comment
https://www.sau.com.au/forums/topic/467725-small-upgrades-on-a-r34/
Share on other sites

Congratulations on your buy.

The search button is your friend, this has be covered countless times.

First "modification" should always be a complete service of the car. All fluids, filters, plugs.

Following that, brakes, suspension and tyres, spend decent money here, as it literally is the difference between life and death.

Free that you can start playing around with power upgrades. Boost control, turbos, fuel system, ECU ect ect.

You car has a 'BOV' from factory, they can handle decent power before they start bypassing, no point upgrading unless it is leaking at this point in time.

  • Like 2

Heaps. Over $1000 if you do the cambelt and water pump. That's why its a good idea to do it your self. You can do things one at a time to save money and learn as you go - there are tutorials for most things. Do the easy things first - like engine oil and filter, spark plugs, cleaning the coils, checking the brakes etc.

  • Like 1
50 minutes ago, Hudson said:

Thank you very much!
and roughly around how much does it cost to fully service your car?

Buy all the components yourself, that way you know exactly what you have in the car. I personally run Penrite Oils throughout, for all the oils and relevant filters it will set you back around $250, $100-$150 in labour if you take it to a mechanic to do it for you. or if your handy on the tools you will be able to knock it out.

The spark plugs are a bit dearer the will be close to $100 for the set, also a relatively easy job to tackle yourself.

With the Km's on the car i would assume that you checked that it had the timing belt done at the 200,000 mark as these need to be replaced every 100,000.

If it hasn't been done i would advise to do the water pump as well, unless you have had experience working on cars, this one is best left to the mechanics, parts and labour for this job will be around the $500 mark.

There should be a sticker under your bonnet somewhere with when the timing belt was last done, either on the timing cover, rad support, firewall, or strut towers.

If you can't find one, it's recommended that you get the belt replaced, if it lets go it will cost you an engine.

  • 2 weeks later...

Hi guys just some info about timing belts don't be thinking that your timing belt will do 100,000 ks from a new install, maybe the nissan factory belt will at a granny pace but after market belts are only warrented to 40,000 or50,000 or 60,000 ks just depends on the manufactuter read the fine print or go to there web site and find it....Remember a timing belt replacement is better than a topend rebuild or a major blow up>>>>>>>>>

  • Like 1
1 hour ago, gazz1991 said:

Hi guys just some info about timing belts don't be thinking that your timing belt will do 100,000 ks from a new install, maybe the nissan factory belt will at a granny pace but after market belts are only warrented to 40,000 or50,000 or 60,000 ks just depends on the manufactuter read the fine print or go to there web site and find it....Remember a timing belt replacement is better than a topend rebuild or a major blow up>>>>>>>>>

Surely the moral of this story is use OEM belts!

2 hours ago, gazz1991 said:

Hi guys just some info about timing belts don't be thinking that your timing belt will do 100,000 ks from a new install, maybe the nissan factory belt will at a granny pace but after market belts are only warrented to 40,000 or50,000 or 60,000 ks just depends on the manufactuter read the fine print or go to there web site and find it....Remember a timing belt replacement is better than a topend rebuild or a major blow up>>>>>>>>>

not to sure where you get your "information" from, both Dayco and Gates give a 100,000km warranty on their timing belts, and bosch offer 100,000km warranty on their high temperature timing belt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...