Jump to content
SAU Community

Recommended Posts

Help with buying a V35

Hey Guys! So like many i am new to these cars. I have read many of threads on the forums to inform me of the V35 Skylines. I have currently found a 2003 V35 with 83,000kms for $10,000. The car unfortunately has no paperwork. It has a service history of the last 20,000kms the owner has owned the car. Would you guys recommend looking at the car or ruling it out completely due to having no books or service history.

Edited by james1999
Link to comment
https://www.sau.com.au/forums/topic/468017-help-with-buying-a-v35/
Share on other sites

My car was i ported with 78,000km just over 2 years ago. I purchased directly from an importer who was able to provide me with the de-registration papers to verify the mileage. This was important,  beacuse in Japan they register the car every two years and the km are recorded each time, so you can tell if the mileage at the time of deregistration is consistant with the last time it was registered. I was lucky as well that a workmate had a contact  in the import industry, who was based in Japan, who verified the car had never been in an accident.

Unfortunately  log books are very rare on imports and I dont even have one on mine. I had a sticker on the intake advising the last service was done at 77k kms. I didnt believe this sticker and serviced the engine, transmission and diff. Unfortunately I was wrong, as all the drained fluids were brand new, and I could have saved myself several hundred dollars on servicing costs. It could be that I purchased one of the only honest cars from Japan...

But to be fair, in the first 12 months, I had to replace the air con and power  steering belts, front  and rear brake rotors and pads. In the last 12 months I have replaced the diff bush, lower control arm bushes and swaybar end links. The car came with Tein coilovers- the front split a seal and cost me 800 to fix around 18 months ago. My rears just had the same thing happen, and I am about to send them to Fulcrum in QLDto be repaired. I still need ro replace the radial bushes, which will cost nearly $600 (as you need a 4 wheel alignment as well).

My point is that you are buying a relatively old car, and it is at the age where things start to fail. If the previous owner has fixed a lot of these issues, then go for it. If not, get an independant inspection done. Other common issues are cam sensor failure, faulty airbag codes, worn wheel bearings and power window  modules. If the mileage seems to good to be true, check for worn floor mats, steering wheels, kick plated and door handles etc as telltail signs.

 

Truth  be told, every time you buy an import, you are taking a punt. They are fantastic cars,  very underrated and very reliable. I have pwned other imports, including an R33 and R34 turbo skyline, and V35's are in a league of their own. My advice is to take your time, do your research, and make sure you buy the right car- dont just shop for price. Hope this helps.

  • Like 2
11 hours ago, camr33 said:

My car was i ported with 78,000km just over 2 years ago. I purchased directly from an importer who was able to provide me with the de-registration papers to verify the mileage. This was important,  beacuse in Japan they register the car every two years and the km are recorded each time, so you can tell if the mileage at the time of deregistration is consistant with the last time it was registered. I was lucky as well that a workmate had a contact  in the import industry, who was based in Japan, who verified the car had never been in an accident.

Unfortunately  log books are very rare on imports and I dont even have one on mine. I had a sticker on the intake advising the last service was done at 77k kms. I didnt believe this sticker and serviced the engine, transmission and diff. Unfortunately I was wrong, as all the drained fluids were brand new, and I could have saved myself several hundred dollars on servicing costs. It could be that I purchased one of the only honest cars from Japan...

But to be fair, in the first 12 months, I had to replace the air con and power  steering belts, front  and rear brake rotors and pads. In the last 12 months I have replaced the diff bush, lower control arm bushes and swaybar end links. The car came with Tein coilovers- the front split a seal and cost me 800 to fix around 18 months ago. My rears just had the same thing happen, and I am about to send them to Fulcrum in QLDto be repaired. I still need ro replace the radial bushes, which will cost nearly $600 (as you need a 4 wheel alignment as well).

My point is that you are buying a relatively old car, and it is at the age where things start to fail. If the previous owner has fixed a lot of these issues, then go for it. If not, get an independant inspection done. Other common issues are cam sensor failure, faulty airbag codes, worn wheel bearings and power window  modules. If the mileage seems to good to be true, check for worn floor mats, steering wheels, kick plated and door handles etc as telltail signs.

 

Truth  be told, every time you buy an import, you are taking a punt. They are fantastic cars,  very underrated and very reliable. I have pwned other imports, including an R33 and R34 turbo skyline, and V35's are in a league of their own. My advice is to take your time, do your research, and make sure you buy the right car- dont just shop for price. Hope this helps.

Thanks for that! I agree. i will definitely view a number of different cars and wait until something good comes up. Cheers mate! 

If you are concerned about its 'pre import' history, order a report from one of the companies that can pull the auction records from Japan, that way you can get an idea if it has had the odo wound back, was a repaired write of, etc.  eg http://www.japaneseodometercheck.com/

If you are still interested, get it checked by a mechanic familiar with these cars or 350Zs, tell them it has no service log books and you just want it checked accordingly (compression test, etc).

1 hour ago, sonicii said:

If you are concerned about its 'pre import' history, order a report from one of the companies that can pull the auction records from Japan, that way you can get an idea if it has had the odo wound back, was a repaired write of, etc.  eg http://www.japaneseodometercheck.com/

If you are still interested, get it checked by a mechanic familiar with these cars or 350Zs, tell them it has no service log books and you just want it checked accordingly (compression test, etc).

Cheers! I will definitely follow these steps! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...