Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Dug up some old data prior to the motor blowing up. Managed to crack the 200km/h barrier down the main straight of Wakefield Park - this back up the car was making some decent power till it spat ring lands (we all knew it was going to happen).

Machinist should be back soon from his last minute holiday and I'll get the crank back then it's party time (maybe). 

I have a track day I'm running with Yez Racing guys so would be nice to have the car running. Let's see!

Screenshot_20170719-213312.thumb.png.9f06d90ae0a44fef359361f181702eb0.png

  • Like 1
  • 1 month later...

3x months later I've gotten my crank back, what an adventure with that shop. Not to mention they decided to charge me more as well, what arseholes.

Anyhow that aside, I've gotten my cam covers powder coated black because stealth is best.

20170911_081606.thumb.jpg.b3ceb345af31d832b6d0be981b0aa7f3.jpg

 

  • Like 3
  • 3 weeks later...
  • 2 weeks later...
18 minutes ago, GTofuS-T said:

Size?

Are they much lighter?

Went yalla habibi spec, 18x9.5 +22. Has some homosex 245 wide tyres, once the car is running again OR when I decide to put a motor and gearbox into it I will get the guards cut/reshaped to allow 265 semis to fit under the guards and look stock. No gay stretch no gay camber.

And funny enough, the Rays 57S aka Gram Lights are indeed lighter than the OEM GT-R wheels.

 

15 minutes ago, admS15 said:

Much betterer

Thank you sir, need to make the car look good before it runs lol

  • Like 1

Pull your finger out and get cracking son. FYI, i have 18 x 9 +22 all round with 265/35. Fit good. Rear guards are rolled a bit, running -2 camber and front has unrolled +20mm fenders. With 265 on 9 inch there is about 5-7mm clearance to the upright.

  • 2 weeks later...

Decided the block should be painted black, so it got painted black.

Also the stock pistons were given a clean, looking good.

So I decided to get new rings, new ACL race bearings, new ARP rod bolts, new ARP 2000 mains, Spool crank collar, Spool Billet N1 oil pump gears installed and lastly the OEM water/oil heat exchanger was deleted. 

Motor is still stock lol.

Special thanks goes to Matt at Redsun Motorsport & Mechanical for dealing with my bullshit and also pointing out some cock ups with a previous shop that did my crank collar install.

20171022_191940.thumb.jpg.2fcb1a134fd251d8d55cf1f8239a6e15.jpg

  • Like 6

Spent part of Sunday going through my collection of nuts and bolts from last year. Not fun, also turns out the service manual doesn't tell you of bolt lengths to use lol.

Modified RWD pickup installed, one day this motor could go into a GTR lol.. 0.1L smaller but higher compression, has VCT, billet oil pump gears so it won't go bang! 

20171029_105641.thumb.jpg.7908d38818b4e073890bd7dcf5b5e13a.jpg

Installed water pump, ancillary bracket as well as the alternator. Whilst installing the water pump with gasket maker I then rummaged through the box and found a gasket for it lol.. too bad so sad.

Another hiccup was that the Stagea engine mount brackets/arms are no good in the R33 so will need to source RWD ones. Then as I was installing the knock sensors followed by the OEM oil pressure sensor - I realised the NEO uses a different one so derp.. need a R33 one.

20171029_123755.thumb.jpg.d012ed1b4bed6ffe8aa3d7c4c46fc2ac.jpg

  • Like 3
13 hours ago, ActionDan said:

Worth redoing the water pump or you confident in the gasket maker? 

 

Nissan manual advises to use gasket maker, so should be on point. 

I really hate putting it together.

I have never used anything but gasket maker. The gasket looks like a piece of a4 paper cut roughly into the shape of a dick anyway, would much prefer liquid gasket

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...