Jump to content
SAU Community

Recommended Posts

4 minutes ago, Dose Pipe Sutututu said:

Sparks...

Would need a substantial current draw in the car to make a bunch of sparks. Obvs to now test resistance to ground of the car's B+ lead. If there's a short there, you'll see it. Only likely place for that, as you suspect is alternator. But there is also the possibility that rats have had a chew on some insulation. Shitbox has the battery in the boot, yeah? Plenty of cable to attack.

19 minutes ago, GTSBoy said:

Shitbox has the battery in the boot, yeah? Plenty of cable to attack.

Sigh... yeah OEM mount rear battery, very R33, very demure, very mindful.

  • Haha 1
2 hours ago, Dose Pipe Sutututu said:

Farken, it's because all the disrespect from me, it's decided to die.

So you reckon a few sweety something's whispered in her window and she'll behave for me? 😛

  • Haha 1
14 minutes ago, MBS206 said:

So you reckon a few sweety something's whispered in her window and she'll behave for me? 😛

Lolololol maybe, man I hate this car.

Lapsed judgement a respray and a new motor, when I should have just scrapped the lot when I had the chance.

Farken.

11 hours ago, GTSBoy said:

Actually, I'd argue that that is exactly when having the wastegate/scroll isolation correct would show the most benefit.

Of course it would be - But you shouldn't be here.

3 hours ago, Dose Pipe Sutututu said:

Lolololol maybe, man I hate this car.

Lapsed judgement a respray and a new motor, when I should have just scrapped the lot when I had the chance.

Farken.

Hey, it's me!

Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it.

If this is not you, then sell it cheaper. It will sell at a certain price after all.

  • Like 2
6 hours ago, Kinkstaah said:

Hey, it's me!

Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it.

If this is not you, then sell it cheaper. It will sell at a certain price after all.

Like a big hood scoop, and massive whiney boy supercharger?

Think he'll sell it to me at my offer above? I could probably get it to $75 if he needs a little more convincing 😛

5 minutes ago, No Crust Racing said:

15a? Crikey

It was $7 more than the 10A - as an Asian, I see value. Dollar per A lol

5A - $113 - $22.60 per A
10A - $189 - $18.90 per A
15A - $196 - $13.06 per A

Sure the maths stacks up, however does the use case? maybe not - however I wish to purchase a boat in the future.

  • Like 1

So.... here's one for @GTSBoy .....

I plugged up the battery in the boot, to my surprise no sparks, no shorts, alarm went off, dome light on, etc. tried to crank the car, motor rotated a few times. Battery is pretty flat so will need more juice before I try to start it.

With the battery plugged up at the back, when you pop a volt meter across the chassis and the jump point, you get a nice 12V, no issue.

PXL_20250508_033158863_MP.thumb.jpg.6f46477e1ba1a5f587b4f0fe3f7cb5b5.jpg

 

However, when you disconnect the battery at the rear, you straight up get a short.

PXL_20250508_033249888_MP.thumb.jpg.c50cf19640830759593a9c697edc3ca7.jpg

 

My broscience is thinking there's some issue with the rectifier, dead diodes perhaps? 

Also your meter is showing not a dead short, but a 40ohm resistance if I'm reading that right.

On a 12V load you would be seeing a 300mA constant draw. Enough to kill a battery in a couple of days easily, not enough to cause sparks and things to glow red hot.

2 hours ago, MBS206 said:

Also your meter is showing not a dead short, but a 40ohm resistance if I'm reading that right.

It beeped, confirming continuity. If it didn't, no issues.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...