Jump to content
SAU Community

Recommended Posts

Air flow meter. You will require 1 when aiming for above 220rwkw using a nistune or any air flow meter ecu. Google would have yielded the same sort of answer. There is so much info online about skylines. You should spend a bit of time researching and you'll get an idea of what needs to be done. Try and concentrate on the more current sort of info.

Best to decide where you are going to get it tuned and what you are going to be doing to the car before you buy an ECU as this will decide what ECU you should be getting. No point getting it now and finding that you need something different later on.

3 hours ago, Cohen said:

What Bosch injectors should I get

Decide on your power goal, the turbo required and then work back from there. Scotty may be able to supply injectors that will work with your existing rail. Don't buy anything until you know what it does and why you need it.

I would just save up for a while until you have a decent budget to spend and are able do get all the mods at once. In the meantime you can get a better understanding of what parts you want by reading up and asking the forum.

You've got all the basic mods and should just enjoy the car for what it is in the meantime. Im guessing you recently got it?

Enjoy it as is until you're willing to drop 5k on it to piss off the AFC and go ECU + turbo + inj + fuel rail/pressure reg and hopefully some change left over for a tune. Just do it all at once so you don't need to keep retuning it.

GCGs TD06 for the rb25 is good, bolts on to low mount manifold, etc

The 25 aren't like the old Nissan fuel rails. The standard 25 reg and rail can do 300+kw fine.

Afc is a good base to realize you need a proper ecu. They will knock off sbout 2 seconds 0-100. But that's about it. It's all the power at low tp that you want in a street car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...