Jump to content
SAU Community

Recommended Posts

2006 250GT Tire Pressure?

Hey guys,

 

Probably an incredibly silly question, but I just want to be sure.

I have 225/55R17's all round and I just realized I haven't checked their pressure since I got the car.

I got told from a friend that it's 32PSI so I went out to the gas station to go check it all.

It's 24 degree weather today (Not sure if that matters) A couple were around 40PSI as the others were mid 30.

 

I changed them all to 35PSI and I'm not too sure if I was meant to do that all around?

I don't know if it's just my brain thinking the ride was a bit more 'bouncy' or if it actually is.

Am I meant to have higher pressure in the rear or vice-versa?

 

I have too many questions, if someone could put my mind at ease it would be greatly appreciated.

 

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/469493-2006-250gt-tire-pressure/
Share on other sites

Awesome, thanks. So it's normal to have the same pressure on all wheels?

Also just another quick question. I found the sticker on the inside of the door that tells you it's recommended kPa.

The tire description is all the same apart from the last bit (95V) on the sticker and I've got '97W' on my actual tires?

(Probably still stressing, but just curious)

 

Thanks again.

53 minutes ago, Huskian said:

Awesome, thanks. So it's normal to have the same pressure on all wheels?

Also just another quick question. I found the sticker on the inside of the door that tells you it's recommended kPa.

The tire description is all the same apart from the last bit (95V) on the sticker and I've got '97W' on my actual tires?

(Probably still stressing, but just curious)

 

Thanks again.

97 is a slightly higher load rating than 95 and W is a slightly higher speed rating than V but for practical purposes they are not that different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...