Jump to content
SAU Community

Recommended Posts

1965 Prince GTB(Skyline)

With my C110 project coming to a end the hunt was on for the next "project" and this Prince just happen to fall into my hands 

 

This one is sadly missing the stock motor but with a Red top RB20 and 970kg weight should prove a fun car 

IMG_3609.JPG

IMG_3610.JPG

IMG_3611.JPG

IMG_3613.JPG

IMG_3614.JPG

  • Like 6
Link to comment
https://www.sau.com.au/forums/topic/470226-1965-prince-gtbskyline/
Share on other sites

Car is not breaking real well so going to do Volvo upgraded.

There was some vibrations at 80kmph seems to be the tail shaft so going to do a custom one piece. When I jacked it up to check tailshaft found the fuel line runs along side the tailshaft so needs moving. 

Not sure the LSD is working probably as well. 

Then the motor has a bit of a miss, would love to get a intercooler of some sorts in there too will see. 

  • 2 weeks later...

IMG_4656.thumb.PNG.488480fefe52a850e949b7ce337336e7.PNG

New tailshaft in seems much better now 

IMG_4738.thumb.JPG.e5f1e2abc17afcfc127c33b9c5a5bd67.JPG

OEM prince rears only probably last this last change.IMG_4972.thumb.JPG.83df1ca3472096880b564b99ee27f719.JPG

New dual set up to work with the new Volvo fronts 

 

Strange old school quirk the left hand side wheels nuts are left hand thread and right hand side right hand thread. I'm lucky I didn't snap a stud before I worked it out 

  • 2 weeks later...
  • 2 weeks later...
  • 1 year later...

Nope it would not have been easy at all, my plan was to make a custom 3/4 triple core radiator and use the other 1/4 space for a small in intercooler. CB12ED95-6FEA-44B4-BD3C-7DE2D53B7B1F.thumb.jpeg.d51fe07c177210a2f5fde2222eb9ebe9.jpeg

but I decide to change the motor in my other car and will now be putting the motor out of it into the Prince DD911671-96F3-44DC-A86B-D8E6F00C6AE3.thumb.jpeg.1f8a18cae6bf98da8b536933660e0091.jpeg

this motor makes around 175-180hp mark so will be a little more the RB and make all the right sounds with the triple Webber’s 

  • Like 1
  • 4 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...