Jump to content
SAU Community

R34 Front End Conversion to R32

specbody

By specbody,
in Exterior & Interior Styling

 Share

Recommended Posts

specbody Rookie

specbody

Posted
Posted

R34 Front End Conversion to R32

I'm in the process of doing a R34 front conversion to a R32. I'm aware that they have a kit for this conversion but I'm not a fan on the style it has and not sure if you can swap parts around so I decided to just use OEM parts for now until I can find parts locally for an R34. I've been searching local for a better bumper but this will have to work for now.

I was lucky to find someone local that sold me the front end with the radiator support. My R32 Front radiator support is not in the best condition so I decided to use the complete R34. You can probably get away with cutting a larger hole into the R32 headlight pocket and use the r34 upper radiator support for better headlight alignment.

I'll attach photos as progress happens.

 

So far I drilled out the R24 support and the R32. Swapped it over and tested everything out. Nothing fully mounted. I didn't like the wheel gapping so I chopped 2 inches off the R32 front aprons to allow 2 inches for the front to fall in for the gapping. I will have time tomorrow to retest fit everything to see if I'm happy with the wheel gaping.

IMG_6895.JPG

IMG_6934.JPG

IMG_6968.JPG

Link to comment
https://www.sau.com.au/forums/topic/471953-r34-front-end-conversion-to-r32/
Share on other sites
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Last Phantom
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Last Phantom · Posted

      I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • Duncan
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Duncan · Posted

      "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Last Phantom
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Last Phantom · Posted

      Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...