Jump to content
SAU Community

Recommended Posts

Oh I'm happy that you're hating then too (well not happy but relieved) because I was starting to worry about suspension components.

Are you loving the E90?


Yeah I love it!
Most comfortable car I’ve ever owned, ac is great, cruise control, leather.....I could go on!

I’m not a fan of the automatic hi beam/low beam headlights tho. I live in a country town and at night the reflections from all the street signs make the high beam switch off and on a lot which is quite annoying

Also mine has the M-sport package which has the lowers suspension and the car sits lower than my GTR believe it or not which can be a bit of a pain haha
On 1/18/2018 at 5:17 PM, PranK said:

The handling is odd

My E92 was pretty bad on poor roads, have now replaced all shocks with Bilstein B4's and it has improved a lot. I'm still debating replacing the 19" wheels with 18's to further improve ride. I'll need new rear tyres soon, so will decide before I buy them.

Auto hi beam dips the lights automatically when a car comes towards you - your car may not have it. There is a sensor behind the internal rear-view mirror. Have you run your VIN through a checker to see what options are installed? There are a number of free sites - google is your friend.

My latest job was to pull the hard disk out of the CIC, and image it to a new disk. I've had a couple of issues of the CIC getting into a reboot cycle, and I'm pretty sure it's the disk failing. I've got an SSD on order - interface is IDE so not common. At the same time I've also managed to update my maps to 2018.

My E92 was pretty bad on poor roads, have now replaced all shocks with Bilstein B4's and it has improved a lot. I'm still debating replacing the 19" wheels with 18's to further improve ride. I'll need new rear tyres soon, so will decide before I buy them.
Auto hi beam dips the lights automatically when a car comes towards you - your car may not have it. There is a sensor behind the internal rear-view mirror. Have you run your VIN through a checker to see what options are installed? There are a number of free sites - google is your friend.
My latest job was to pull the hard disk out of the CIC, and image it to a new disk. I've had a couple of issues of the CIC getting into a reboot cycle, and I'm pretty sure it's the disk failing. I've got an SSD on order - interface is IDE so not common. At the same time I've also managed to update my maps to 2018.
I have a sensor on the back of the mirror so I'll definitely test the auto high beams.

I wish I knew somebody with non run flats so I could try the car on them. I don't want to follow that route until I'm sure that's the problem. I have B8s on the Bora, definitely the best shocks I've ever had.

I'd love to read about what you do with the CIC. Mine is the CCC but there are upgrade guides for the CIC which have piqued my interest.

So I read the manual and saw nothing about the high beams other than how to turn them on. There was a heap of info about the adaptive xenons, is that what you mean? They change where they point based on steering and speed, they are also auto anti dazzle. I have these and totally love them. I've only driven at night a handful of times (went on holidays not long after getting it and daylight saving hasn't helped) but I love seeing the lights moving around.

Auto headlight is different to adaptive headlights. High beam assistant is described on page 101 of my user manual. The option code on my car is "S5AC High Beam Assistant", and this is what it does (c&p from a google search):

What is high beam assistant?
High-beam assist recognises oncoming vehicles at night, switching headlights between main and dipped beam automatically. It's a very clever bit of kit and is claimed to make nocturnal driving less stressful
 
Yesterday I received my new OBD port to RJ45 adaptor, which allows a network connection into the CIC via the OBD port. This makes it simple to get the file needed to allow the generation of an FSC code, which in turn is needed to install new maps. I'd already got the file I needed for my car by plugging the hard disk into a Neutrino VM, but had ordered the adaptor from China a few weeks ago and wanted to see if it worked. Now that I have the OBD-RJ45 adaptor and an IDE disk - USB adaptor, I can backup & restore CIC & NBT hard disks, and generate FSC codes for map updates
Auto headlight is different to adaptive headlights. High beam assistant is described on page 101 of my user manual. The option code on my car is "S5AC High Beam Assistant", and this is what it does (c&p from a google search):
What is high beam assistant? High-beam assist recognises oncoming vehicles at night, switching headlights between main and dipped beam automatically. It's a very clever bit of kit and is claimed to make nocturnal driving less stressful   Yesterday I received my new OBD port to RJ45 adaptor, which allows a network connection into the CIC via the OBD port. This makes it simple to get the file needed to allow the generation of an FSC code, which in turn is needed to install new maps. I'd already got the file I needed for my car by plugging the hard disk into a Neutrino VM, but had ordered the adaptor from China a few weeks ago and wanted to see if it worked. Now that I have the OBD-RJ45 adaptor and an IDE disk - USB adaptor, I can backup & restore CIC & NBT hard disks, and generate FSC codes for map updates. 


Yeah that’s what I mean, the high beam assist haha!
On 23/01/2018 at 6:15 PM, GeeDog said:

Auto headlight is different to adaptive headlights. High beam assistant is described on page 101 of my user manual. The option code on my car is "S5AC High Beam Assistant", and this is what it does (c&p from a google search):

1

Page 101 for me is Keyfob battery changing. :( Maybe you have LCI E90? 

On 23/01/2018 at 6:15 PM, GeeDog said:
What is high beam assistant?
High-beam assist recognises oncoming vehicles at night, switching headlights between main and dipped beam automatically. It's a very clever bit of kit and is claimed to make nocturnal driving less stressful
 
 
Yesterday I received my new OBD port to RJ45 adaptor, which allows a network connection into the CIC via the OBD port. This makes it simple to get the file needed to allow the generation of an FSC code, which in turn is needed to install new maps. I'd already got the file I needed for my car by plugging the hard disk into a Neutrino VM, but had ordered the adaptor from China a few weeks ago and wanted to see if it worked. Now that I have the OBD-RJ45 adaptor and an IDE disk - USB adaptor, I can backup & restore CIC & NBT hard disks, and generate FSC codes for map updates
 

Nice! This sounds awesome! Maybe you could do a write up about it?

One super irritating issue I was dealing with was the absolutely useless passenger side mirror.

20180124_173033.jpg

 

You can see how bad it was. It was so hard trying to change lanes in crazy Sydney traffic when commuting when I really had no trustworthy mirror.

So, I bought a cheap convex mirror on eBay which has made a big difference though the mirror itself is a bit warped. Its still a million times better.

20180125_111716.jpg

20180125_112018.jpg

So much better.

  • 4 weeks later...

Ok, bit of an update.

One thing that gets under my skin with any car is something that doesnt work. Even if I never plan to use it, I just hate that it doesnt work.

Case in point; my electric rear sun shade. One side is broken and it opens kinda strangely... 

20180217_140014_001.jpg

Add to that the terrible faded parcel shelf and awful condition of the C-Pillar trim, I thought it could all get a clean up. 

20180217_140428.jpg

Hard to see the fade until the tray was out of the car.

20180217_143836.jpg

Heres the little clip/slider that is broken.

20180217_144333.jpg

20180217_144403_001.jpg

I used JB Weld on it and left it overnight.

20180217_145917.jpg

But, it just disintegrated again when I touched it, and so did the other side. The plastic was just far too brittle to fix. Another victim of Australian UV I think.

I found a guy in the UK that sells just the runner and clips and so I bought a bunch to replace them all.

This is the state of one of the C-Pillar trims.

20180217_151702.jpg

The parcel tray looked so much better after a spray, but I totally killed the fabric. Its very hard and brittle now. I don't think anybody will notice though.

20180218_113140.jpg

20180218_152417.jpg

20180218_152722.jpg

When I was playing at the back of the car I looked under at the exhaust and noticed a flap.

20180218_130055.jpg

With a vacuum activated actuator.

20180218_130111.jpg

So, after reading online about 330i exhaust flaps and how the second pipe closes to stay quiet at commutting and freeway type speeds (ie, less drone) I decided to block it. 

20180218_130119.jpg

The car sounds great. The noise sticks around when it used to fade away. I wish there was another flap to open some kind of race system... :)

 

So, the other thing is while I was in the back of the car and rubbed my head on the roof, all the liner started to sag. Thankfully there is a trim piece at the 3rd brake light I can use to get in and spray some adhesive. Because I am far too particular to have a car with a saggy headliner. Its not a Kingswood ffs. 20180218_152911.jpg

Oh, and lastly ... 

Over the past month I've needed to top up the coolant twice. With only a small amount, but still. Added to that was an error code (check engine light on intermittently) which related to the VANOS system (variable valve timing). There was zero change in driving or anything. I dropped it into the warranty-approved mechanic today to investigate and he flushed the engine and gave it a solid service. He said that because of the k's (50k) the k's since last service wasn't a lot, but the months since last service was - it was serviced last in 2015. I knew this, I just hadn't done it yet. He was going to clean the VANOS solenoids rather than replace them straight away.

He also said that the seal on the radiator drain plug was leaking. Beauty, easy fix. 

So, he called just now and said everything went to plan. Car is running well and no codes. Fingers crossed he's sorted it.

He did tell me that rear tyres need replacing. This has caused a fair bit of thinking because I am considering ditching the run flats and making a spare tyre kit in the boot. The RFT's grab on everything and make rough roads horrible to drive on.

Lots of yanks buy a space saver and kit, or just a foam filler. 

I absolutely love this car and have missed it today. Its been a long time since I've been as taken by a car as I am by this.

OK, it happened with the Bora and the GTR's and the Stagea, but whatever. Shut up.

 

Some nice TLC stuff going on here... But you'd have to be pretty shitty if you bought this car new and all these "old car" issues were happening to it...

 

I get the feeling a fastidious owner taking care of the car wouldn't have prevented these issues.

4 hours ago, Leroy Peterson said:

I get the feeling a fastidious owner taking care of the car wouldn't have prevented these issues.

 

Totally agree. But I'm a fastidious owner and it has few enough kay's to undo the wrongdoings (imo).

 

1 hour ago, emts said:

I think with all the commodore drivers stealing the X5 rims to put on theirs...

 

then it only fair that you put gold 21 inch Simmons on this...

or at least on the front and put some steelies on the back..

3

Ordered some 21" Vault chromies.

In seriousness, I happened to find a guy selling a set of 17" MSport wheels with tonnes of rubber (and RFT) on them. Better offset and staggered. Picked them up today. 

The wheels have some of the worst gutter rash I've seen, but can't complain for $400 and gives me another project considering upgrades and changes to this car will be minimal for a while.

  • PranK changed the title to My E90 BMW 330i

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...