Jump to content
SAU Community

Recommended Posts

Hello all, 

recently I’ve been having some trouble with my drivers side window. The symptoms it was showing would lead me to re solder the window relay, I ended up getting a new one and the problem did not change. The window is stuck up, when I switch the switch to the up position, there is a click from the relay (which is good), when I click the switch down there is no click. So I’m wondering if the problem is the switch or the regulator motor, I’m hoping it’s the switch but I really don’t know. I also took the switch out and cleaned it, then I put it back in and the window went down, so I put it back up again, and when I went to put it down and it was stuck up again. Thank you for any help.

Link to comment
https://www.sau.com.au/forums/topic/472983-r32-gtst-window-stuck-not-the-relay/
Share on other sites

Did you check the motor itself at all? 

And try bypassing the switch and seeing if it works.  Unplug it and rig up a 'hot' wire with an inline fuse.  If this works then yes its the switch. 

 

15 minutes ago, tridentt150v said:

Did you check the motor itself at all? 

And try bypassing the switch and seeing if it works.  Unplug it and rig up a 'hot' wire with an inline fuse.  If this works then yes its the switch. 

 

But I thought the window has to be down to get the regulator and motor out?

1 hour ago, smart_garrett said:

I also took the switch out and cleaned it, then I put it back in and the window went down, so I put it back up again, and when I went to put it down and it was stuck up again. Thank you for any help.

Keep trying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...