Jump to content
SAU Community

Recommended Posts

I had these made by Kido Racing (Taiwanese company) with plans to sell but never went ahead. These were never used or fitted. Made for my S14 with R32 GTR rear brakes, but may also fit R32/33 GTR.

  • Front: 8 piston calipers w/ temp sensors - 356mm full floating rotors.
  • Rear: 4 piston calipers - 330mm two piece rotor with integrated handbrake ring.

- Comes with braided lines for front and rear.

- Track pads supplied (most likely rubbish)

- Compatible Brake Pads:

  • AP Racing CP5070D51 - AP Racing CP3894D51
  • HAWK HB-121
  • HAWK HB-109
  • Ferodo FRP3076
  • PAGID 8018

- Digital gauge for front brake temp

Price: $3000

fullsizeoutput_614.thumb.jpeg.9ff6099336684569410cd0a35df8a464.jpeg

IMG_1066.thumb.JPG.29d240d80f5b3d4db06a62977733e63e.JPG

IMG_1067.thumb.JPG.8d68fe9c85bb57eb7945f3d5535da105.JPG

IMG_1068.thumb.JPG.03f75c64d49acbad458d220c59913b63.JPG

IMG_1069.thumb.JPG.7e79c7284bbf432bf0707dd3e9d8ced1.JPG

IMG_1070.thumb.JPG.7fd3eed1a36fa62e956f9e7affa47013.JPG

IMG_1071.thumb.JPG.21e10ba60bf414f26d280845a4f10125.JPG

IMG_1072.thumb.JPG.b2e577beeaa1ee00d7fdf3bd435b3a46.JPG

IMG_1073.thumb.JPG.adeffca4593f5cd0f623cd3fa6ed30dc.JPG

IMG_1074.thumb.JPG.c6062b2e1645057945146e1426476b00.JPG

fullsizeoutput_617.thumb.jpeg.92d56604f584503eb324171ae8878431.jpeg

IMG_1076.thumb.JPG.f542dd60cfdcb89eb18b6d88490f1251.JPG

IMG_1078.thumb.JPG.ca3bb5d5cf3a2da252b622189e519ded.JPG

 

  • 1 month later...
location?  within how much distance from Ballarat , victoria please?


Not sure about stagea fit sorry. Located in Ferntree Gully.

I have someone who said verbally they will buy them today, no money received yet, can let you know if it falls through.

Thanks
Dave

ok  that's fair enough, if sale falls through i would definitely like to come and look at them, and have a measure etc to see if they'd fit 

On 2/21/2018 at 11:25 PM, oxford1327 said:

ok  that's fair enough, if sale falls through i would definitely like to come and look at them, and have a measure etc to see if they'd fit 

Hi Danial,

Buyer did stuff me around and they are for sale again if you're still interested.

Thanks

David

Would love to but it's going to depend on how much it costs to get car repaired now as got hit and run by a turd on the freeway Friday, lucky I have a dash cam do hoping police will be able to chase them down. ?. 

I'll be in touch when I can afford them, but if they are gone in the meantime so be it.... 

  • 2 weeks later...

If possible, I'd like to come and measure up whether these will fit my rims either Saturday or Sunday, if that suits you? And if they will I can leave a cash deposit on the day to secure them. 

Shoot me a text at 0417151262 if you don't want to discuss on here, I've had similar experience with scamming dirt bags while trying to sell my race bike in last few weeks. 

If possible, I'd like to come and measure up whether these will fit my rims either Saturday or Sunday, if that suits you? And if they will I can leave a cash deposit on the day to secure them. 
Shoot me a text at 0417151262 if you don't want to discuss on here, I've had similar experience with scamming dirt bags while trying to sell my race bike in last few weeks. 


No problem, will send you a text in the morning.

Yeah, can’t believe he (sorry Maria) won’t give up. Dumbass didn’t realise he texted me from the other number by accident the other week.

Dave

Okey dokey, if I don't answer straight away it's cos I'm on nightshifts this week, so as soon as I wake up (usually around 4pm) I'll give you a holler,and can sort out time etc from there. 

Both @I will and @Ozmaria have been using the same IP addresses. 

They used the same IP when posting in this topic too. 

Both are now banned. 

EDIT: For those who read this and are confused - i have hidden the posts that led to the bannings.

4 minutes ago, PranK said:

Both @I will and @Ozmaria have been using the same IP addresses. 

They used the same IP when posting in this topic too. 

Both are now banned. 

Thanks Christian for acting on this proactively, was going to inform you about it also and pass on the details.

Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...