Jump to content
SAU Community

R34 xenon lights

elle

By elle,
in General Maintenance

 Share

Recommended Posts

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

The bulb above is the high beam 9011/HIR1 halogen bulb. The big bowl design has been superseded by Philip's replacement 9011. If you want, you can get the original bulb design with this Toyota Bulb: 90981-13066.

For the low beam, you twist that 'high voltage' plug off, then unclip it. It should tell you what the bulb is on the base (D2R).

elle Contributor

elle

Posted
  • Author
Posted

Thankyou so much for the info, I still haven’t pulled the one out that you said was a d2r bulb cause it a pain and I have to take the bar off so I wanted to wait till I had the globes I needed, are they all the same as Long as they say d2r or is there something else I need to know when buying them like something specific for the car model.. sorry for the dumb questions..

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

D2R are all the same (it's a standard size, like H7, H4, T10, etc.)

I get my bulbs from powerbulbs, I find that standard replacements work perfectly fine.

https://www.powerbulbs.com/au/product/osram-xenarc-d2r-single

Aftermarket bulb is a lucky dip, so stick with OEM replacements (i.e. Philips or Osram).

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

No problem, happy to help. Just ignore the eBay/LED idiot crowd.

While I'm talking about eBay, there are tons of fake (read >90%) Philips and Osram bulbs on there. They are very (visually) good copies but their quality control are trash, so be careful. Which is why I buy from powerbulb, I know I'll get genuine and their prices are good (with frequent discount codes).

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...