Jump to content
SAU Community

R32 headlight identification help

Griffin
 Share

Recommended Posts

GTSBoy Grand Master

GTSBoy

Posted
Posted
1 hour ago, Griffin said:

Has somebody swapped the round one in?

No, that's a completely normal GTSt or GTR headlight (depending on the mountings for the grille).  You have parking lights on the outer, the normal (shitty) projector for low beam and the normal high beam in the inner position.

The N1 headlight was simpler, replacing the projector with a plain reflector.  If you look at these https://www.google.com.au/search?q=n1+headlights+r32

You will note that the outer reflector is very large.  The parker globe must live in there somewhere too.

The cheaper models of R32 had yet another headlight without the shitty projector, so more like the N1 headlight in only having reflectors.  But not the same.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

These are N1 headlights (H4 bulb I believe). Note the grill mounting tabs on the inside.

DSC02975.JPG

 

As for the projectors, main visual difference in the park light reflector section. Early projectors are H3C and later ones use a weird H1 bulb adaptor. I may have that the wrong way around.

SzlHWrg.jpg

All of the projectors are complete junk and should be replaced with something better (see the DIY section).

HUSTLA Collaborator

HUSTLA

Posted
Posted (edited)

So the pov pack r32 reflector headlights can have the grill tabs screwed on as they accept them and are still available from Nissan. 

What then is the difference between pov pack headlights and n1s if both accept the brackets as they are not molded.

Edited by HUSTLA
Correction

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...