Jump to content
SAU Community

Recommended Posts

Talk to Vspec Performance in Melbourne. They know a guy (forgot his name/shop) that do mostly suede & alacantra retrimming but I'm assuming can do leather too.

Talk to Vspec Performance in Melbourne. They know a guy (forgot his name/shop) that do mostly suede & alacantra retrimming but I'm assuming can do leather too.


Muse Design
  • Like 1

I would be interested to know what it would cost. Muse seem to be Facebook only - their website looks to be non-existent.

Vspec quoted $650 to refurbish my R32 GT-R wheel a couple of years ago. That seemed like a lot of $$ but maybe that is just what it costs.

There is also this from a similar thread a while ago:

On 4/4/2015 at 9:27 AM, Anonymouse said:

$300 is what I pay. I get mine done through Shaun at Trims in Canberra.

It's not exactly the same leather as oem. I'll post pics of my oem next to a new retrimmed one this evening.

Which I assume is: http://www.trimsbyshaun.com.au/

Mine looks rubbish now so I should get onto doing something about it.

  • Like 1

I just called the Canberra guys they said $350-$385 depending on the condition of the wheel he can also rebuild from scratch if needed. I'll post up what muse quotes me once I call them later today.

 

I also got quoted from a guy west of Sydney for $450 for just leather re trim.

 

  • Like 2

I got x trim to do mine. They are in smeaton grange nsw. Was $350 i think. Came out really nice. Not like the stock "leather". Real leather was used. It is a little bit lighter than a stock one but it goes dark if you amourall it.

Workmanship and feel is fantastic

https://flic.kr/p/21P5cmd

24 minutes ago, GTSBoy said:

 

You wouldn't dare put f**king Armourall on leather!!!!!!

I dont use that sort of stuff at all anymore. Spray anf wipe with water and some leather cleaner/conditioner from time to time where needed.

I've had 5 done through trimsbyshaun and the results are top notch. Uses genuine leather. Turnaround is around 5 business days. Maybe a few days more if your interstate.

I have a re trimmed 32 one sitting at Trojan Motorsports in Canberra. $450 exchange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...