Jump to content
SAU Community

Recommended Posts

Hello all - odd question.

I knew that upgrading to a 3" TBE with a 100cell cat would increase power and noise but after a few months of running it I am now getting just a tad sick from the fumes being emitted. I am wondering if anyone here has an RB25DET running a 3" Exhaust with a 200cel cat or higher and can confirm what power they are able to get from running a higher cel cat and how bad the fumes are,  better if you have changed from a 100cell cat to a higher cell cat. 

Currently making 204rwkw with no power modifications besides the Nistune & TBE - I am willing to sacrifice power.

 

I appreciate any feedback ?

Link to comment
https://www.sau.com.au/forums/topic/474607-100cel-200cell-power-outputfumes/
Share on other sites

Are you sure that the fumes are attributable to the 100 cell cat? Are your breathers and PCV valve up to scratch? Have you compression tested to see if you might have excessive blow by? Do you know someone with the ability to put an exhaust gas analyzer on you tail pipe? Are you running the stock blow off valve?

Get a tune!!!  Heaps of us here with performance CAT's and no fumes, and way more power than 200rwkw.

And when you are talking fumes, is it oil, gearbox oil, oil splash fumes, unburnt fuel, burnt fuel, burnt coolant, can you see smoke? is there black all over the back of the car? does the car leak oil when parked? heaps of problems that can be easily fixed, need to be more specific sorry.  

What fuel are you using?

I'm finding that going from 98 to E85 has made the car slightly more fume-y, using the exact same exhaust system and 100-cell cat.
I reckon ethanol in general provides a more olfactory experience.

Thank you both for your responses!

@KiwiRS4T

I have not checked any of what you have said - I will make a note and see if I come up with anything. I am not running any aftermarket BOV.

 

@tridentt150v

I have a Nistune ECU which was installed and mapped by a performance workshop already. I know the coolant and oil smell so I can write that off. No smoke and the back of the car is clean. My old STI ran rich but the smell is different to what I am getting now - I'm starting to think I may have a leak somewhere - the exhaust is new and was installed by a workshop.

Check the filler neck.....if its raw fuel then it can be an issue.  When they comply the car in Australia they replace the filler neck with a small hole 'unleaded' one.  Dodgy shops don't bond this to the original filler pipe/hose....a few of us on here have had to Sikaflex the gap.

Did you only notice the fumes after the exhaust and cat install?
I went from a 3 inch highflow cat (unknown what brand, maybe xforce?) to a venom 100cell and the fumes were definitely worse, but mainly when the car is idling in the garage is the only time i can really notice it. I'm assuming a 100cell cat won't do much in terms of reducing nasty emissions. I would just keep the 100 cell cat if i were you, changing cats could also put the tune out of whack.
How bad are the fumes? It shouldn't really be noticable at all with normal driving, unless you are moving really slowly in traffic or stationary.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...