Jump to content
SAU Community

Recommended Posts

25 minutes ago, PranK said:

This is for an R34 but will be almost exactly the same process.

Mine is kinda easy to change tbh. I already got the cap removed so its open atm lol.

 

56 minutes ago, GTSBoy said:

It's missing.  Likely it is one of the coils dying when it gets hot enough.  Take you 30 minutes to fix it.

Since i do not live in the u.s. or australia, we all have to order stuffs from ebay here and wait a week after delivery in miami to get our product in our hand.

https://www.ebay.com/itm/SplitFire-Coil-Pack-Set-to-suit-Nissan-Skyline-R34-25GT-t-RB25DET-Neo-6/221270930401  this is still sitting in my card 
If anyone has any suggestions on which pack i can order let me know!

Edited by Pastechi
7 minutes ago, tridentt150v said:

Better talk to Kudos about your car before you buy, they can help you with the correct coils.

i have to check indeed because supose this rb25 was switched when they were building the car some years ago so i got to check.

took this before i went to drive around so this issue can come up. I'll be googling around tomorrow at work and see what i can find lol

20180820_200838.jpg

3 hours ago, GTSBoy said:

If they'd just put a kit together for Neo I'd be all over it like a fat kid on a smorgasboard.

The RB25 NEO kit are under development as we speak :). We know the kits we sell will perform but we have to jump few hoops in the design to make the NEO kit look good, price conscious and give options for those who run FFP or stock J-pipe with the 'traction control' throttle body.

We will update the status from time to time in our FB page.

19 hours ago, PranK said:

The new :sau: trader @5-0 Ignite has just posted a topic on their coil packs;

 

 

 

Oh my..... did someone say rb25det s2?
What are the chances of international shipping?

8 hours ago, Pastechi said:

Oh my..... did someone say rb25det s2?
What are the chances of international shipping?

Hi, we sure do international shipping. I would like to confirm that you are in Curacao? We have express courier shipping available to Netherlands but it doesn't seem like it is able to deliver to Netherlands Antilles. We have to opt in using Australia post (still express but may takes longer because due to remote location)

RB25DET S2 full kit is available, email us with your request and option you choose and we will reply with the shipping rate :)

 

7 hours ago, GTSBoy said:

Ask them.  I'd suggest they'd do it in a heartbeat.

Thanks :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...