Jump to content
SAU Community

Recommended Posts

So, I've recently purchased a C34 Stagea with the legendary RB25DET engine. It was brought to my attention that I cant drive a turbocharged car on my green P's. I was un-aware of this because im from NZ and there were no restrictions on engine size there so it never crossed my mind. I'm also on green p's only because I am under 20 I transfered my New Zealand full licence and have my green P's until I'm twenty in January. So anyway I came to discover that I can get an exemption since it's power to weight ratio is under the limit. I went onto the raws website and screenshotted and printed off the details of the car, weight and engine power output. took it into the department of transport and they said they couldn't use it and that I need a letter from nissan stating the weight and power output. I emailed nissan Australia and Nissan Japan and they both said they couldn't help thats when i found the raws website but apparently that's un-usable, completely wasted my time waiting at the department of transport for nothing which is always fun... If anyone could help it would be greatly appreciated! Dont wanna go selling it straight after buying it. Thanks!

Yeah good luck getting such an old turbo vehicle on power-to-weight. Wait till january or risk getting caught. A great way at not getting caught is to not drive like a moron and do skids or weave traffic etc. a lot of people seem to forget that.

Yes but its in Japanese.  Someone may have it on a site where you can download it quickly. Its 353,788KB

OK 2 or 4WD?

Page 9 of the manual gives the power as 173KW @ 6400 rev/min

and page18 gives the weight as 1795kg

Nissan Stagea Manual 001.jpg

Nissan Stagea Manual 002.jpg

Nissan Stagea Manual 003.jpg

  • 3 weeks later...

Hey does anyone have an eEnglish version of the manual stating the given stuff? I've applied for the exemption but they are saying I need to get it translated. So thought I'd just ask on here first, just in case anybody has one. Thanks.

  • 2 weeks later...
On 8/30/2018 at 8:40 PM, KiwiRS4T said:

Yes but its in Japanese.  Someone may have it on a site where you can download it quickly. Its 353,788KB

OK 2 or 4WD?

Page 9 of the manual gives the power as 173KW @ 6400 rev/min

and page18 gives the weight as 1795kg

Nissan Stagea Manual 001.jpg

Nissan Stagea Manual 002.jpg

Nissan Stagea Manual 003.jpg

Do you have a clearer copy of this by any chance? I'm trying to get it translated and the translator said they cant quite read the page showing vehicle weight and such. Thanks.

  • 2 weeks later...

Try JPNZ International. I bought a translated owners manual for a series 2, so different power and weight. I bought it 8 years ago so not sure if they will still have it.

[email protected] or

www.jpnz.co.nz

 

 

On 9/27/2018 at 12:02 AM, StageaALAN said:

Do you have a clearer copy of this by any chance? I'm trying to get it translated and the translator said they cant quite read the page showing vehicle weight and such. Thanks.

I'll try and upload them in landscape as they seem to be bigger that way...yep if you click on these they come up quite well.

Stagea Manual 001.jpg

stagea manual 2 001.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...