Jump to content
SAU Community

Recommended Posts

I have an R33 GTR seat set, 2 x front and rear bench.  I think they are out of a '96, they have the mauve/purple inserts in the headrest.

The top part of the rear seat was sun affected [ie faded and UV weakened/rotted] so I took it to a local upholstery business and it has languished there for a few months now.  They can't seem to find the grey brushed velour [not the centre inserts, we will be able to re use them] that is endemic to nearly every model.  So I am looking for a supplier that can sell me 3 metres of this material so I can get the seat finished.  Ideally I would go to some other business that can do the job but this would mean a long trip cos I live in a small town in the country, Sydney is 4 hrs away, Canberra is 2.  Plus I feel that if I can find the right material then the upholsterer should be able to do the job [surely its not that difficult].

So does anyone know of code numbers I can ask about [okish], or a supplier [better]?

TIA

Link to comment
https://www.sau.com.au/forums/topic/474930-recovering-rear-gtr-seat/
Share on other sites

Hey mate, I too had similiar damage to my rear seats. It will cost too much to get them fixed and chasing a perfect colour match will be difficult. I would suggest you looking on eBay, Gumtree and the Sales section of this forum to buy used seats and just replace them that way. 

Cheers,

lol....the fabric is available, I've had a section redone before [albeit around 10 years ago].  And the seats are going in my Gtst.  Buying used will turn up the same issue, all the rear seats fade across the top.  The rear window glass just lets that sun in big time!!!

I also have a set of genuine factory leather seats out of a SIII '98 R33 GTR that I've had refurbished [still have to remove and recoat/powdercoat the carriage to finish].  But was hoping to get the grey velour ones sorted as well.  leather is OK in the winter but burns like f#*k in the summer ?

 

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

  • Haha 1
13 hours ago, Robzilla32 said:

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

Can you post some photos of these "ridiculous expensive Nismo covers"? 

6 hours ago, Robzilla32 said:

Sample pic

 

img87900-rnr20-1.gif

 

They actually look quite very nice. Where did you get them from?

Nengun Performance has them for a crazy $1,700 plus postage. Wow.

https://www.nengun.com/nismo/seat-cover-set-skyline-gtr

 

Edited by Robocop2310

Those covers look very schmick Rob, but - to me - its like hiding rust with new paint.   And I can't afford $1700.  The material I want will cost much less than that, but just have to find the right knowledgeable person to help me source a supply.

  • 2 weeks later...
2 hours ago, tridentt150v said:

Still trying, still asking?

Give these guys a call. A mate of mine had a friend that had his seats repaired by these guys and he seemed happy. I have never used them personally but have  chat with them and let us know how you go.

https://www.gumtree.com.au/s-ad/revesby/other-automotive/car-seat-upholstery-repair-sydney-leather-car-seat-repair/1101453969

  • 1 month later...

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

3 hours ago, CU's GTR said:

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

Who did you use mate and can you please post some pictures? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...