Jump to content
SAU Community

Recommended Posts

Hey guys, I'm looking to repaint my rear boot garnish as it's a little worn and am after the correct paint called for my black R33 GTR. The sticker in the engine bay confirms paint code KH3 but when I go to a paint shop they say 3 variances pop up on their system, gloss black, gloss black with some white or engine bay gloss stain. Something like that.

Just wondering if I want the closest match, what which variance would I select? Has anyone with a factory black R33 GTR had any paint mixed?

Many thanks,

Alex

Edited by Robocop2310
Link to comment
https://www.sau.com.au/forums/topic/475288-r33-gtr-gloss-black-paint-code-kh3/
Share on other sites

1 hour ago, GTSBoy said:

Um....paint matching is the job of the spray painter.  He buys and mixes and tests paint to make sure it matches the adjacent panels.  You don't just spray and pray.

I agree with you mate, but to spray the rear garnish it's easily done so I would rather pay $25 for a bottle of custom spray paint then fork out something like $180 for it to be sprayed by a professional workshop seeing I already have the precise colour code.

36 minutes ago, Robocop2310 said:

I agree with you mate, but to spray the rear garnish it's easily done so I would rather pay $25 for a bottle of custom spray paint then fork out something like $180 for it to be sprayed by a professional workshop seeing I already have the precise colour code.

The 3 variations of the code are there to accommodate the varying condition of the paint depending on wear, sun exposure etc. The paint place mixing the paint should ask you for a sample like your fuel filler cap to check against. The fact that they didn't leads me to believe you went somewhere like supershit auto. If that's the case you may want to rethink your choice and go to a paint specialist who really knows what they are doing. 

 

Another consideration is whether or not you want 2 pak or acrylic and what sort of finish you are willing to accept. The cheaper $25 cans wont be 2 pak.

2 hours ago, admS15 said:

The 3 variations of the code are there to accommodate the varying condition of the paint depending on wear, sun exposure etc. The paint place mixing the paint should ask you for a sample like your fuel filler cap to check against. The fact that they didn't leads me to believe you went somewhere like supershit auto. If that's the case you may want to rethink your choice and go to a paint specialist who really knows what they are doing. 

 

Another consideration is whether or not you want 2 pak or acrylic and what sort of finish you are willing to accept. The cheaper $25 cans wont be 2 pak.

Ha ha yep, I did go to SuperShit Auto!

i just bought a can so will give it a shot given the hot weather we’ve been getting here in VIC if all fails will drop the damn thing to a panel shop

Thanjs everyone!

Take the car to Montrose Panels in Lilydale. Ask for John to respray it. He is a gun a matching the paint colour. He did my front and rear bars and matched the paint to perfection. PM me for more details as he may do it on the side.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I strongly recommend anyone playing with cars chasing anything electric, get a basic understanding of using a DMM, and about 12V DC systems. They're REALLY easy, you only need to know V=IR and how to apply it, and you can work out what your readings should be doing. For a simple check on a light bulb, you're looking for 12V at the positive to the light, a near zero resistance to ground, and then for a small resistance across the globe when unplugged. If one of those values isn't right, you won't get what you need. Now if they're all okay,and you then plug the light in, and it still won't work, you now do a voltage check across the globe positive to negative. It should effectively read full battery voltage. If it's not, especially if it's quite low, the age old V=IR starts to be able to be thought about, you now know though, for the current flowing, there isn't much voltage for the given resistance, but the rest of that V has to be dropping somewhere else. So now do a voltage check from ground of globe, to ground of car, then do voltage check from positive of battery, to positive of the light connector. Things like a high resistance in a wire/join will start to "steal" voltage on you. So now step back through which ever wire, until you find the voltage drop is non existent, you're now before what ever is steal your voltage for example.   There's plenty of YouTube videos, but really worth understanding some V=IR, and doing some even theoretical numbers to start to understand it. Then you'll know what the DMM is telling you.
    • Is Jackie home by Friday?
    • Item 10: Tech Edge wideband sensor interface and display. You’ll need to buy a new sensor. $150. Item 11: part of a Willians 5 point harness. $40 Item 12: OS88 gear display. No need for it now, my PPG sequential came with one. $30
    • I took it out, even though I knew I probably don't know what I'm doing other than looking for power signal lol. Lesson learned here I guess, even if it looks normal, worth checking as it only takes a few seconds anyhow. And maybe disconnect the battery, even though really shouldn't have to.
×
×
  • Create New...