Jump to content
SAU Community

Recommended Posts

Some interesting comparisons:

 

https://www.msn.com/en-au/news/election-2019/scott-morrison-said-an-electric-vehicle-cant-tow-a-boat-is-he-correct/ar-AAB9FWL?ocid=spartandhp

 

looks like they might be Ok for general use, but you still can't do big miles in one without stopping and recharging.  eg I sometimes drive to Coffs Harbour and its over 800km for me, I can't do it without a long lunch somewhere while the car gets zapped.  I do fill up the Skyline a few times now, but its 15 minutes in and out, not an hour or so.

Link to comment
https://www.sau.com.au/forums/topic/476958-electric-cars-comparisonfact-checks/
Share on other sites

There are diesel powered cars that will do over 1000km without refueling and currently there are no electric cars that can match this but it is stupid to make wider use of electric cars a political issue . Alternatives to IC engines are necessary and inevitable.  There are challenges to be overcome but consider this:

Many years ago my then boss bought a "portable phone" which came in a small suitcase and cost $5,000 ...about half the price of a medium car. Today for $200 you can buy a phone the size of a cigarette packet (another dinosaur!) and with more computing power than desk tops had not too long ago.

Never mind Tesla - the Chinese will soon have millions of electric cars on the road and India won't be far behind. All the major manufacturers are urgently trying to get electric (not hybrid) versions of all their models.

This is without any doubt the way of the future although much work remains to be done.

  • Like 1

The point you've raised is energy density. At the moment, the amount of energy in diesel is greater than that of the equivalent sized battery.

You're absolutely right that they won't do it yet. But they are coming. There's always work on new battery types.

I forsee Australian (and American) cars being a lot more hybrid in the near future. This will give you the benefits of electric without the limited range that currently exists in an electric only vehicle.

It actually makes sense for a hybrid ute. All that zero rpm torque plus a decent range. I'm a little surprised it hasn't happened already.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...