Jump to content
SAU Community

Recommended Posts

Hi guys, the opportunity has come up to buy the turbo, manifolds, dump pipe etc from an M35 Stagea for pretty cheap. 

I've read that this setup bolts straight up to a V35 coupe but cant really find much info on the matter. 

Has anyone done this, or confirm it can actually be done?

 

There was no turbo option on the M35 Stagea VQ35 so it must be some kind of aftermarket kit so as long as you are getting the complete kit including ECU. loom etc I can see no reason why it would not work on the V35 Skyline but double check everything first and ask questions of the seller.

2 hours ago, KiwiRS4T said:

There was no turbo option on the M35 Stagea VQ35 so it must be some kind of aftermarket kit

I beg to differ, this statement is wrong. The NM35 from october 2001 to August 2004 was available as a turbo, all vehicles were 5speed automatics and were either available with HICAS or IRS. The usual problems with loom, High compression, injectors and ECU could be expected with this conversion.

They came with a VQ25DET aswell -  Afaik alot of this turbo set up is pretty straight forward when putting it onto a VQ35.

Read up on it a few years back.

If parts are cheap give it a go :P

Yuh, so Kiwi's statement is still correct. He said "no turbo option on the M35 Stagea VQ35 ". The operative bit being VQ35.

So the real question is "can you bolt VQ25DET stuff onto VQ35 (NA)?". And, I am 110% sure that this question has been asked on here a number of times before. Just search!

Edited by GTSBoy
'coz I stuffed something up and had to ninja edit it while I still could!

Sorry guys,  I should have been more specific. The turbo setup is coming from a VQ25 DET and will be fitted to my VQ35.

I actually had a chat last night with someone that's done it and looks like it's relatively straight forward. 

I've already committed to the purchase, so a build thread may be incoming...

  • 4 weeks later...

@camr33 I had since looked into this as im friends with the guy who sold you the parts.

 

Xr6T Intercooler will fit fine along with the M35 stega set up. Only a little bit of work needs to be done. Makes the DE actually look cool with a big single turbo.

Yeah, I did some research prior to purchasing and spoke to a couple of others who've done it. Already have the intercooler sorted too. Just need to work out engine management, injectors and fuel pump next.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...