Jump to content
SAU Community

Recommended Posts

8 hours ago, Duncan said:

r32 hicas has 2 outlets from the power steer pump...and that pic (while difficult to see clearly), seems to have 2 outlets.

Cheers Duncan

I'm in middle of sorting out my power steer system in my race car, have you had any issues with yours or have you gone aftermarket?

I'm limited in what I can change by production car rules, I have to run standard pump but can (and have) changed the pulley to underdriven.  I had issues with leaking from the cap until I added a reasonable sized cooler but it has been OK since. HICAS is removed and so are the vanes in the rear stage of the pump so it doesn't die from pushing against the blocked off line.

I also lost a belt once but NFI why as nothing had changed recently, and only once in 10 years race/rally

Yes. Particularly for a race car that will see high revs. Make sure it’s a baffled reservoir that is designed to slow the oil down upon return. I’m not sure if it’s foaming (fine bubbles) or the speed that the oil is hit the reservoir but either way it needs an internal method of controlling it or you’ll have oil everywhere after a few laps. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...