Jump to content
SAU Community

Recommended Posts

I forgot to post this a few weeks ago.

My car was the volunteer car for JDM Accessories parts including their new wheels.

They're a fair but chunkier than stock but deffs worth the upgrade. Been running for over a month now and it's way nicer to use than stock.

 

Would recommend for the price. 

This isn't a sale post. Just a recommendation incase you get the usual trash quality v36 wheel.

Mention  me when you purchase and he may even give you a discount :)

received_2569249106638322.jpeg

received_747615072341849.jpeg

received_413444036040087.jpeg

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/479110-v36-steering-wheel/
Share on other sites

Do they have a better button bezel such that the paint doesn't scratch off the plastic so damn easily?

Also, does it feel weird at all with the flat bottom when doing full turns? I just can't help but think the discontinuity in the shape would feel a bit odd.

30 minutes ago, The Max said:

Do they have a better button bezel such that the paint doesn't scratch off the plastic so damn easily?

Also, does it feel weird at all with the flat bottom when doing full turns? I just can't help but think the discontinuity in the shape would feel a bit odd.

I've had  steering wheels and my friend has also has 2 and none of them have ever had this scratching issue.. i find it weird that its so "common" yet we've been through 4 and never once had the issue.

 

It doesn't come with those, you transplant those from the old wheel. Only takes 15 mins to do (super simple DIY)

You actually dont really notice it. It was weird the first 3 or 4 times but you easily adjust.

 

On 11/6/2019 at 4:47 PM, DashyyPC said:

I've had  steering wheels and my friend has also has 2 and none of them have ever had this scratching issue.. i find it weird that its so "common" yet we've been through 4 and never once had the issue.

It doesn't come with those, you transplant those from the old wheel. Only takes 15 mins to do (super simple DIY)

So I'll have to get mine wrapped then.

I haven't scratched mine but it did have a couple of scratches on it already. Maybe the previous owner didn't clip their fingernails regularly? :)

Care to message me the link to the supplier? I'm keen to know how much it'll cost me. Would be nice to have a fatter wheel.

  • 2 weeks later...

The button Bezel on my 370 was pretty well scratched when I purchased the car. Purchased a new Bezel using Amayama. Better quality, will not scratch. Let me know if you want the part number.

6 hours ago, SOO06E said:

The button Bezel on my 370 was pretty well scratched when I purchased the car. Purchased a new Bezel using Amayama. Better quality, will not scratch. Let me know if you want the part number.

I'm all ears, as I've been dubious about replacing it with another OEM one in case if it's the same materials/coatings. I was going to get mine wrapped.

Just checking, this is the bezel with cutouts for just the buttons on the left side for the stereo control, phone, back button and voice control, yeah?

Edited by The Max

Yeah the part you will get is definitely an upgrade in quality. In fact its nearly impossible to scratch I reckon.

Part Number ; COVER,PLASTIC Nissan 48463JK00A is without the buttons. A bit of google or put that part number into Amayama or Partsouq and you will find yours.

If you youtube steering wheel removal G37 or similar you will find a DYI on how to remove the steering wheel. IT takes about 15 mins with the right tools.

From memory you will need a 1/4 Socket and a T20H torx driver.

Good Luck.

Edited by SOO06E

If 48463JK00A is without the buttons, that will not be suitable for me, as I have buttons on the left side of the wheel and so the bezel needs to have the cutouts to accommodate them.

I think I'll just remove my wheel one day, disassemble it and look for the part number imprinted on it.

11 hours ago, The Max said:

If 48463JK00A is without the buttons, that will not be suitable for me, as I have buttons on the left side of the wheel and so the bezel needs to have the cutouts to accommodate them.

I think I'll just remove my wheel one day, disassemble it and look for the part number imprinted on it.

Lol i think he means its just the shroud without the buttons

 

As in you dont get the literal buttons. Cutout will still be there.

 

Also super easy to take off. Would be alot easier to take apart and Repaint/Wrap it yourself compared to buying a new one.

5 hours ago, DashyyPC said:

Lol i think he means its just the shroud without the buttons

 

As in you dont get the literal buttons. Cutout will still be there.

 

Also super easy to take off. Would be alot easier to take apart and Repaint/Wrap it yourself compared to buying a new one.

That's what I was hoping he meant, despite the fact I explicitly asked about the cutouts and not the actual (not literal) buttons themselves. Yes, I know I'm a grammar nazi but I just hate the overly misused word, "literal".

Anyway, the reason why I'm a little concerned is that when I looked up the data for that part number in two different drawings from Nissan's EPC sheets, the same part number appeared with the cutouts in one drawing (possibly hinting at cruise control on the right side) and no cutouts at all in another drawing (as well as no button cluster).

Given all that, you can see why with so much ambiguity from user and manufacturer alike, I'm a little dubious.

31 minutes ago, The Max said:

That's what I was hoping he meant, despite the fact I explicitly asked about the cutouts and not the actual (not literal) buttons themselves. Yes, I know I'm a grammar nazi but I just hate the overly misused word, "literal".

Anyway, the reason why I'm a little concerned is that when I looked up the data for that part number in two different drawings from Nissan's EPC sheets, the same part number appeared with the cutouts in one drawing (possibly hinting at cruise control on the right side) and no cutouts at all in another drawing (as well as no button cluster).

Given all that, you can see why with so much ambiguity from user and manufacturer alike, I'm a little dubious.

I have a spare one at home. when i get home ill get you the part number from it.

Legend. Thanks dude.

For anyone else who may be curious, Amayama seem to be the only guys carrying that particular part number. That being said, when I search based on my VIN, it claims to be a 48463-JK01A instead of 48463-JK00A. Luckily Amayama carries that one too. I already checked with Partsouq and they carry neither.

  • 7 months later...
  • 1 year later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...