Jump to content
SAU Community

Recommended Posts

Both ECUS were running and the car was operational, all wiring has been checked and found to be in perfect order, this is what I've been told and have no reason to dought it.But in the back of my mind I wonder,so we will find out when the third one goes in soon. I was surprised that adaptronic was going to swap it with one of the haltech units but very disappointed they wernt going to chip in with the dyno needed to tune that ECU, after spending a hell of a lot of money I need to ease up a bit and get some driving time in and enjoy what is a awesome car, after all I wanted a new ECU for greater protection for my motor and peace of mind.

 

Wiring was checked, but was the voltage checked?

Why would they pay for dyno time? it's like DeWalt sells you a drill, then replaces it with the new Dewalt XR series and you ask them to build you a new garage (bad analogy but you get the idea).

when a problem arises its not as simple as some think, they have to find whats going on, which means time and money spent. the second unit put in still has to be put on the dyno and run to make sure everything is running properly, there's more time and money, that's my point. That would have to be one of the worst analogy's I've ever herd.If indeed the units were faulty I should be reimbursed for the time and money having to find the issues but I know that's not the way it works but I thought it was worth a try.You carn't just send the ECU back to them for a exchange without logs and the issues at hand. this is time consuming and someone will end up out of pocket.

Yeah I remember calling them last year as I'd heard good things about them. I thought they were the most arrogant, up themselves lot ever. I mentioned swapping from FC d Jetro to Haltech Elite and they basically scoffed at me for even suggesting it.

  • Like 1

I here you, its a shame at the end of the day your one tiny little peace of the puzzle they couldn't give a rats about, but they have made a big mistake this time treating a reputable business the way they have, its only going to hurt them in the long run.Word of mouth is a powerful thing.

28 minutes ago, BK said:

Yeah I remember calling them last year as I'd heard good things about them. I thought they were the most arrogant, up themselves lot ever. I mentioned swapping from FC d Jetro to Haltech Elite and they basically scoffed at me for even suggesting it.

Put it this way, you don't see many fast cars (Drag/Coota/Roll Racing/Circuit/WTAC) using a PowerFC, but if a shop insists on using a PowerFC then yeah.

Yes it might make the power, but there's no engine protection, no spare I/Os, no closed loop strategies, no anything really.

spot on Johnny, when we spend outrages amount's off money on built engines we need as many protections as possible,as you have just stated these are what all new ECUS provide today and is what people want nomatter what ECU brand they buy.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...