Jump to content
SAU Community

Recommended Posts

Hello everyone. So I installed my Hicas delete kit.(picture below). After install,  i had my alignment done. The bushings are the ones I installed that came with it. Now when I drive and shifting through gears, i feel my rear end wanting to fish tail a little. Is this normal? I'm driving an r33 gtst. Just want to know so I don't take her back to garage to get them to look it over again. 

15850554916634866986402043585056.jpg

Link to comment
https://www.sau.com.au/forums/topic/480021-hicas-delete-question/
Share on other sites

2 hours ago, Murray_Calavera said:

If it's all bolted up properly and the alignment is good, just keep driving it. You'll get used to the changes with more seat time. 

Oh ok. My daily is an S2000 and it doesn't feel like that at all. 

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

On 3/24/2020 at 5:28 PM, GTSBoy said:

What is the rear toe after the alignment?

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

38 minutes ago, MoMnDadGTR said:

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

Ok. I do have a warranty on the alignment. If I were to take her back to redo the alignment, is there a rear setting I should be shooting for or just make sure she is in the green?

2 minutes ago, Aphonechanh said:

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

Toe out would be way twitchy. Zero toe should be very easy to disturb. Toe in should be more stable.

Be aware that static toe, as measured on the rack, may completely change when the vehicle is moving, particularly if you have stuffed bushes in any of the arms.

You should have got a sheet with your alignment telling you your numbers...I got a feeling your alignment is not wrong just not set up the way you want it. I know when we get alignments done around here you can see the whole review of what they did and your final numbers. 

Do this for the rear, if you want some stability.

  • -1 degree camber (these things camber in hard when they squat)
  • 1mm toe in each side (2mm total toe in, on squat these shit boxes toe out)

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...