Jump to content
SAU Community

Recommended Posts

Hello everyone. So I installed my Hicas delete kit.(picture below). After install,  i had my alignment done. The bushings are the ones I installed that came with it. Now when I drive and shifting through gears, i feel my rear end wanting to fish tail a little. Is this normal? I'm driving an r33 gtst. Just want to know so I don't take her back to garage to get them to look it over again. 

15850554916634866986402043585056.jpg

Link to comment
https://www.sau.com.au/forums/topic/480021-hicas-delete-question/
Share on other sites

2 hours ago, Murray_Calavera said:

If it's all bolted up properly and the alignment is good, just keep driving it. You'll get used to the changes with more seat time. 

Oh ok. My daily is an S2000 and it doesn't feel like that at all. 

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

On 3/24/2020 at 5:28 PM, GTSBoy said:

What is the rear toe after the alignment?

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

38 minutes ago, MoMnDadGTR said:

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

Ok. I do have a warranty on the alignment. If I were to take her back to redo the alignment, is there a rear setting I should be shooting for or just make sure she is in the green?

2 minutes ago, Aphonechanh said:

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

Toe out would be way twitchy. Zero toe should be very easy to disturb. Toe in should be more stable.

Be aware that static toe, as measured on the rack, may completely change when the vehicle is moving, particularly if you have stuffed bushes in any of the arms.

You should have got a sheet with your alignment telling you your numbers...I got a feeling your alignment is not wrong just not set up the way you want it. I know when we get alignments done around here you can see the whole review of what they did and your final numbers. 

Do this for the rear, if you want some stability.

  • -1 degree camber (these things camber in hard when they squat)
  • 1mm toe in each side (2mm total toe in, on squat these shit boxes toe out)

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...