Jump to content
SAU Community

Recommended Posts

40 minutes ago, admS15 said:

f**k man, you have a real sickness. Et streets on 16's or even 15's will grip much betterer. Need that side wall big profile energy. Not sure if will look more or less bogan though.

I'm going 17" because I want to have matching rims, and 17" was the smallest size the FR1's come in, so comprises were made for the Bogan-ness of the FR1 life, it isn't optimal, but meh, it's going to be good enough for what I want

My old GTS-t Skyline made similar top end power to the Commodore, and got a 11.09 on ancient worn out 255/50 16 Mickey Thompson streets, and they hooked pretty good on the street in the dry as well, which is handy with a RWD car

Plus the Mrs will never pick the change, which is always a bonus

As for looking more or less bogan, impossible, the car is a old red commodore with gold FR1 Simmons, and I'm a old balding white guy with tattoos, so  I'm pretty sure I got bogan covered, much to my Mrs anguish

  • Haha 2

I has rubbers, build date was 0822, fresh stock, which is nice

Ordered the rims, they're getting machined for offset, I pick them up and get the tyres fitted tomorrow

Typically it has started to rain again so Wednesday night drags probably isn't on the cards

20221101_155010.thumb.jpg.83732098f5c7ba8b8b6c778c531c34cd.jpg 

  • Like 2

Almost the ultimate bogan chariot but needs 2 doors for that title.
Get onto a suspension shop about a decent rear setup. That tyre can work with the right setup.
4l80 or 6l80 an option for you? t400 is getting hard to find now and decent internals
https://www.facebook.com/BrinksPerformance/posts/624930669420914

18 minutes ago, robbo_rb180 said:

Almost the ultimate bogan chariot but needs 2 doors for that title.
Get onto a suspension shop about a decent rear setup. That tyre can work with the right setup.
4l80 or 6l80 an option for you? t400 is getting hard to find now and decent internals
https://www.facebook.com/BrinksPerformance/posts/624930669420914

My current suspension will do for the 2 or 3 trips to the drags I do a year, the car is just a street cruiser with visions of grandeur 

My old R33 only ever ran Bilsteins and kings and hooked OK on the Mickeys

As for the gearbox, there's a few options, but really, unless/until the 4l60e goes bang in a big way there's no hurry

Currently the trans is rated/guaranteed to 600hp at the motor, which it is roughly at now, Craigs have stated that it will still be fine though as they add in a fudge factor, they said it should be good for about 700hp, or 450kwatw but, that would void warranty and be on limited time

Fark, I keep blowing the main 60 amp fusible link 

No reds at all, I just parked the car after returning from a drive, then tried to move it to wash off some dirt and nothing, no power at the ignition, no reds, no horn, no central locking,  no immobiliser, found the main 60 amp fusible link blown, so replaced it with the 60 amp ABS one to see what was going on, which brought the reds up, until I tried to start it, which then blew that fuse as well 😒

There's a short somewhere, I'll  need to jack up the car and look for the short, I'm hoping it's an easy "starter motor wiring meets exhaust headers" type of thing

Stupid cars 🚗 😒 🙄 😑 😤 😐 🤣

  • Sad 1

That sucks, I guess she doesn't want you to put those new tyres on her

FWIW, it won't be the starter motor via a 60A fuse, way too small, but headers (and anything else you've modified, which is almost everything now :p) would be the place to start.

Multimeter in the Fuse socket will probably confirm continuity to ground, and one option is to disconnect battery +, put 60A fuse back in and then check the regular fuses one by one to narrow down which specific circuit has the issue (I'm assuming the 60A fuse is in serial with the individual fuses like in sykline)

3 hours ago, Duncan said:

Multimeter in the Fuse socket will probably confirm continuity to ground, and one option is to disconnect battery +, put 60A fuse back in and then check the regular fuses one by one to narrow down which specific circuit has the issue (I'm assuming the 60A fuse is in serial with the individual fuses like in sykline)

Yeah, but if it's enough current to pop the 60A fuse, it really shouldn't blow one of the smaller fuses downstream. I would presume that there's a significant short in the wiring between the 60A fuse and any other fuses downstream. Melted insulation is the obvious thing to look for.

But yes, pulling any and all downstream fuses, then probing in the 60A fuse socket looking for earth would be the best way to start. Hot tip - there shouldn't be a nice path to earth there!

1 hour ago, Duncan said:

It never ends

But it is expected with old or modified stuff 

And it's not like it spends it's time in a garage coming out on sunny Sundays, the car is regularly used and abused, rain, hail or shine...well, rain and shine, I always keep an eye on the BOM for work, the car and bike is typically hidden away during major storms

I expect things to happen, nothing lasts forever,  and shit breaks when you lean on them, but, I'm happy enough because the old girl gives alot of joy, the car is fun as well..............😜

As for the new starter, I've still got some heat sheild left over from the job I did on the headers, I might look at making a cover like this thing > DCI-XT-5000-STR.thumb.jpg.836ec6b8b1a907e4a6410811e19de383.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...