Jump to content
SAU Community

Recommended Posts

Hey guys, 

Just bought a R33 today and I've never had such a hard time driving a car. The drive itself is fine, feels super healthy, but the clutch is super aggressive. It has a OS Giken of some sort according to previous owner. The issue I'm having is that it engages almost at the top of the pedal and it's instant. Seems like there 1-2cm of distance between full engagement and disengagement. 

Is there anything I can do about that? I've been driving manuals for 10+ years and I stalled this car 30-35 times today at red lights. 

Link to comment
https://www.sau.com.au/forums/topic/480135-r33-clutch-engagement/
Share on other sites

Check it is bled properly.

On a different car I moved the pivot point and ussed an adjustable rod to get the take up point where I wanted it and a wider range of modulation, so there are things you can do, but it will never drive like a stock clutch.

Just now, Ben C34 said:

Check it is bled properly.

On a different car I moved the pivot point and ussed an adjustable rod to get the take up point where I wanted it and a wider range of modulation, so there are things you can do, but it will never drive like a stock clutch.

Ok, as long as I can get a bit more modulation out of it I'll be happy. If the revs aren't high enough there's no saving it when it starts to stall. I'll check it out tomorrow and see what it seems to be, was too dark by the time I made it home. 

unfortunately with this sort of clutch you have to be aggressive with them, meaning you have to get the revs up or you will stall it every time.i have the same problem with mine as they get warmer they grab instantly. but I had no option as I was needing something to handle lots of grunt,i am use to it now but you get a few funny looks from some people as you take off.

4 hours ago, MindlessR33 said:

Ok, as long as I can get a bit more modulation out of it I'll be happy

As said above. You'll not get any more modulation out of it unless there is some left at the top of the travel, in which case it will be eating itself as you drive it now. All you'll be able to do is move the takeup point somewhere else.

9 hours ago, robin schembri said:

unfortunately with this sort of clutch you have to be aggressive with them, meaning you have to get the revs up or you will stall it every time.i have the same problem with mine as they get warmer they grab instantly. but I had no option as I was needing something to handle lots of grunt,i am use to it now but you get a few funny looks from some people as you take off.

Yeah, I'm feeling much better about it now. Found some hills out in the country this morning and practiced for a bit. I almost always get it now and if it feels like I'm not giving her enough I just let the tires bark. Thanks!

Good to see you persisted and now you're getting the handle of it, now you get my last comment I chirp the wheels all the time just to get the thing moving, on the flat its fine but once you take off on a incline its more challenging, great to see you didn't bag the clutch its just what it is.mines a ceramic clutch which can handle a lot more heat, I use mine down the strip so I needed something to handle the launches.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...