Jump to content
SAU Community

Recommended Posts

Couldn't find the exact injector but guessing would be something like these https://www.efisolutions.com.au/bosch-2000cc-fuel-injector-0-280-158-821

Spend the extra money on these, much better control at idle & cruise. Makes a massive difference when tuning if the injector is linear & comes with all the data to setup correctly
http://injectordynamics.com/injectors/id2000/

Injector choice is one thing a lot of people don't understand that is important especially with a high powered flex fuel street car.
Better off buying something that comes with all the info not just 2d deadtime/voltage offset. Want flow at diffrent pressures,min pulse width and pulsewidth adder.
Places to look for data are 
https://www.deatschwerks.com/
https://fuelinjectorclinic.com/ECUData
https://www.raceworks.com.au/wp-content/uploads/2018/10/LR-RW-DATA-INJ-CHARTS.pdf
http://help.injectordynamics.com/support/solutions/folders/263533

Not to mention the Bosch 2000cc are a gas, not liquid injector, and are shit for reliability. Been a lot of bad reports about them changing flow rates after repeated liquid use, causing individual cylinder lean outs.

Lithium wrote something very detailed about them in here, I think it might be somewhere in the Borg Warner EFR thread.

  • Like 1
1 hour ago, robbo_rb180 said:

Couldn't find the exact injector but guessing would be something like these https://www.efisolutions.com.au/bosch-2000cc-fuel-injector-0-280-158-821

Spend the extra money on these, much better control at idle & cruise. Makes a massive difference when tuning if the injector is linear & comes with all the data to setup correctly
http://injectordynamics.com/injectors/id2000/

Well at least they are proper car injectors supplied to Ford

 

https://www.robietherobot.com/storm/fuelinjectorguide2.htm (sorry you have to scroll way down the page til you come to the heading "Ford")

1 minute ago, BK said:

Not to mention the Bosch 2000cc are a gas, not liquid injector, and are shit for reliability. Been a lot of bad reports about them changing flow rates after repeated liquid use, causing individual cylinder lean outs.

Lithium wrote something very detailed about them in here, I think it might be somewhere in the Borg Warner EFR thread.

That's right but no doubt Bosch makes various kinds of injectors. These appear to be for petrol engines but the table I found may not have all the info the OP requires. This is what Lithium was talking about:

SPECIFICALLY about "Bosch 2200cc" / ID2000 injectors.

Can't find a petrol 2000cc on the Bosch motorsport site, so is there one ? The Bosch 1550/1650cc seems to be the largest guaranteed from Bosch for petrol. I thought the Siemens 2000cc + (2400cc ?) was the only guaranteed petrol one on the market after speaking with CRD and Maatouks. They are around the $300 mark each too, a lot dearer than the Bosch 2000cc

15 minutes ago, BK said:

Can't find a petrol 2000cc on the Bosch motorsport site, so is there one ? The Bosch 1550/1650cc seems to be the largest guaranteed from Bosch for petrol. I thought the Siemens 2000cc + (2400cc ?) was the only guaranteed petrol one on the market after speaking with CRD and Maatouks. They are around the $300 mark each too, a lot dearer than the Bosch 2000cc

If you follow my link you will find that they were OEM on a number of Ford cars.

Sorry you have to scroll more than halfway down the page til you get to the heading "Ford" 

Yep thats right. They are also listed as flowing 252cc/min, not 2000cc. This is for part 2F1E-A7A.

I take it OP is referring to the eBay ad listing these injectors as 6 x R34 2000cc injectors for $200 ?

https://www.ebay.com.au/itm/r34-skyline-2000cc-bosch-fuel-injectors-x6-2F1E-A7A-200/124054198368?hash=item1ce234d860:g:IcAAAOSw2bRd5hmr

There does not appear to be a part number 2F1E-A7A-2000, even though they are shown on the packaging.

I suspect these are Ford Taurus 2000 model injectors, not 2000cc injectors and seller has no idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...