Jump to content
SAU Community

Battery required for bnr32. Which one?

Matty George
 Share

Recommended Posts

BK Grand Master

BK

Posted
Posted

Here's what I use on the 32 and 33 gtr. Supercharge MF40B20L Goldplus series is a good choice if you want to keep the standard size. I have to use a 40 in the 32 as I have too much shit around that area to run anything bigger. In my 33 it's a 55. The MF40B20L is 390cca and compact, this is the standard physical size for 32 and 33 GTR. The Century MF40 version by comparison is 330cca. MF55B24L is a better choice as they are 490cca, but they are wider. These seem to be my picks as they best available under $200.

After that you go all out with the Optima AGM Yellow tops. By far the best, but approaching $400. They are available at 700cca plus and people have reports of batteries lasting 7 years or more. I don't see the point as Supercharge Gold plus is 40 months no questions asked replacement warranty.

The MF40 is the standard factory size and MF55 is actually the Nissan cold weather pack upgrade size, hence why you can fit both. Same depth and height, just a 55 is wider as mentioned above. So if you can run at least a 55.

More importantly than any battery though is get a Ctek, especially if it is not a daily driven car, which is most GTRs. Need a good maintain charger.

  • Like 1
BK Grand Master

BK

Posted
Posted

@GTSBoyIs that true - as in outright replacement, or is it just the pro-rata

Complete replacement, as in within 40 months of purchase if it fails, full new battery on Gold Plus series. My old man even did one literally at about 39 months from purchase recently on the XR6. I can say I have done it about 3 times across all of my car's ever. The dealer stamps it on purchase, and they are very adamant about retaining and supplying your original receipt upon replacement, but apart from that, yeah no problemo. Sometimes they'll want it overnight to prove it, but if it is stuffed its stuffed and they'll see that.

BK Grand Master

BK

Posted
Posted

Cool, you realise that it is the right positive terminal instead of the left, which is standard in a GTR ? It does have the correct small terminals though.

CCA is also 450 on a 38ah battery.

Does not sound like good value unless it does last you at least 5 -  6 years, as that is the price of 2 x MF55B24 with 490cca and 50ah. I am yet to justify the price of Optima. Happened to have this in the ute for reference:

 

IMG_20200530_175309_2.jpg

BK Grand Master

BK

Posted
Posted

There is absolutely no question they are good, all the serious 4WD and off roader guys run them here. I just couldn't justify $300+ for 38ah and 450cca.

Post back in 5 years and see if it's still going strong ?

BK Grand Master

BK

Posted
Posted

You really don't get what I'm saying do you ? 38ah is the smallest, most piss weak size battery for any car, regardless if it is a $100 or $1000 battery. As I said above 50 minimum is generally the go for any car now, and paying that much for such a small battery just seems silly. Anyway sounds like you went and got one so hope it lasts ok.

When people have been going through the trouble of going to an Optima yellow top they go for the big ones and make them fit for a massive increase in CCA and AH, or to mount them laying down as they are AGM. 

  • Like 1
BK Grand Master

BK

Posted
Posted
On 01/06/2020 at 3:58 PM, GTSBoy said:

NS70MF

650 CCA.

This is essentially the physically largest and largest capacity battery you can drop into the stock location.

image.thumb.png.2e8994f196a4965e93ab86c3655b1948.png

Hey if this is in your 32 , next time you need a battery the Supercharge Goldplus equivalent is the MF80D26. Same dimensions but 80AH and 720cca ?

  • 1 month later...
Matty George Collaborator

Matty George

Posted
  • Author
Posted
On 30/05/2020 at 2:48 PM, BK said:

Here's what I use on the 32 and 33 gtr. Supercharge MF40B20L Goldplus series is a good choice if you want to keep the standard size. I have to use a 40 in the 32 as I have too much shit around that area to run anything bigger. In my 33 it's a 55. The MF40B20L is 390cca and compact, this is the standard physical size for 32 and 33 GTR. The Century MF40 version by comparison is 330cca. MF55B24L is a better choice as they are 490cca, but they are wider. These seem to be my picks as they best available under $200.

After that you go all out with the Optima AGM Yellow tops. By far the best, but approaching $400. They are available at 700cca plus and people have reports of batteries lasting 7 years or more. I don't see the point as Supercharge Gold plus is 40 months no questions asked replacement warranty.

The MF40 is the standard factory size and MF55 is actually the Nissan cold weather pack upgrade size, hence why you can fit both. Same depth and height, just a 55 is wider as mentioned above. So if you can run at least a 55.

More importantly than any battery though is get a Ctek, especially if it is not a daily driven car, which is most GTRs. Need a good maintain charger.

Just an update, took your advice bk and went the supercharge gold plus? Starts awesome and very reasonable price. Went the 55B24.

ERO54N Community Regular

ERO54N

Posted
Posted
On 30/05/2020 at 9:44 PM, BK said:

When people have been going through the trouble of going to an Optima yellow top they go for the big ones and make them fit for a massive increase in CCA and AH, or to mount them laying down as they are AGM. 

Hey Ben,

Awesome insight into the topic.

Quick question, what would be involved with swapping over to Optima Yellow?

  • 2 weeks later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 GT-T cycling ABS pump

      By Kinkstaah · Posted

      Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...