Jump to content
SAU Community

Recommended Posts

Nothing better than a present at work. 2x Nismo GT Pro 1.5 way LSDs. 
 

Want to thank JHH for their help with this one. Specially Will. Honest advice from past experience. 
 

now these can go in the sump, sump on the engine, engine in the car, some fabbing, some tuning and maybe I’ll see this thing this year yet. 

AE877ED7-5B9D-4A49-ADC1-F5CC15B3ED0C.jpeg

  • 2 months later...

Hello. So had a few things happen since the last update. Diffs are now installed. Gearbox, clutch and engine are all together and in the car. Did a test fit on the Turbo. Looked amazing but has shown that a few lines will need to be relocated. 
 

still need to install all the wiring and EGT.  Install fuel system. Connect all of the oil and water lines. Fab intercooler pipework and exhaust  

 

then fire it up tune, run in and retune 

 

50B237D4-6DE0-472C-8DC0-FEAAD3E71014.jpeg

634DD182-7BC1-4409-B9EA-7BAEA64AF09E.jpeg

B3AA7568-5E9F-43A7-AF58-FB0C58F45EC3.jpeg

22F399B6-78F9-47AB-A105-D1383D2EEFD5.jpeg

  • Like 5
  • 2 weeks later...
  • 4 weeks later...

Hello. Things seem to be moving in the right direction. Diffs are in, sump is on obviously. Timing belt is on and cams are set to “0”.
 

now it’s fabrication time. Intercooler piping. Exhaust. Oil/water/fuel lines and the last of the electrical hookup.
 

I’m hoping to see it on the road in the next couple of months.  

769627C6-DAC6-462F-B74D-82389A3D91A7.jpeg

49CD22E9-92DF-4990-B66D-0B12B6BD8AFF.jpeg

C9ED9EE8-CB8B-4724-A703-29C6D7364402.jpeg

ED259132-5FAA-4AE2-BADC-F42987D9D672.jpeg

  • Like 2
  • 1 month later...

Hello. 
 

another stage completed. Cold side pipework is done. Exhaust should be finished today. 
 

need to ceramic coat exhaust manifold. Install EGTs. Finish fuel lines and we are at start up and tune. 
 

might see it for my birthday next month. 

904B0B64-4431-4E90-8EE5-5AB1BE8312B5.jpeg

01A53088-D33B-40A0-B7F7-799482441795.jpeg

A7D25CC0-18AC-486B-8617-15D39C96F828.jpeg

05353880-82E7-4894-B620-01321DDCEF9A.jpeg

A715461C-D3B6-4666-B27C-9A1C515BAF94.jpeg

686B882D-85CA-4C29-AE9B-CE655D8C0911.jpeg

C0ECDAF4-6D3B-47EE-8BA3-C29578A1CA9A.jpeg

B9BF73FC-C3D1-46D9-AF66-348F49691022.jpeg

  • Like 2
  • 3 weeks later...
  • 1 month later...

Manifold has been sent off for ceramic coating. No ETA.
 

In the mean time I have placed a deposit on a pair of 1600hp rated rear CV from Crank Motorsport. Should be here in September. 
 

also bought a single piece AlphaOmega 2000hp aluminium tail shaft. That one should be here next week. Apparently it’s about half the weight and makes quite a significant difference in engine response. 
 

that should be the driveline all sorted. 

6652787F-E5D7-4C59-8BB0-EDF70A40444B.jpeg

0964FE9B-1872-4770-B2E4-996DD391BB20.png

  • Like 3
  • 1 month later...

Hello. Well it’s been an up and down few weeks. Everything was going well. Parts arriving and fitting (always a bonus). Ran into an issue with the clutch booster. JUN intake GT plenum is huge. We got the boost delete kit and it was still touching. So that’s getting machined but it’s not a huge issue.
 

tail-shaft arrived after we genuinely thought it was lost in transit. That was very nice. Then things turned very frustrating. We got to the part where we were hours away from starting the car only to find that the fuel rail had 11mm holes and my injectors are 14mm. So now we are waiting for a new one. But it will be purple this time to match the rest of the dress up colour scheme. 
 

baring any further issues, car should be started next week. Then it’s getting it engineered and licensed. Might even get to do some running in before a leave for Japan. Will be going to Osaka and Tokyo. Won’t have too much time to my self but I will visit some workshops. JUN is definitely on the cards.


dump and screamer pipe porn below. 

F565DC36-C95D-459C-921F-B095DBC4470F.jpeg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...